User manual HAUCK ALPHA

[. . . ] Always secure your child with the safety belt, in order to prevent him or her from falling or sliding out of the highchair. The highchair is suitable for infants and small children from 6 months to 10 years (maximum) old or weighing up to 25 kg (4 st. Make sure that the screws, bolts and clamped connections are firmy seated. [. . . ] WARNING ADVICE: take care that all safety belts are fastened properly. THIS PRoDUCt CoRRESPoNDS to tHE NoRM EN 14988 -1 +2 2005 SALES INFoRMAtIoN: this high chair is for child up from 6 months up to 10 years old or up to maximum 25 kg in weight. cARE AND MAINtENANCE: In General Please check the high chair function on a regular basis. Proceed in the same manner with components that are broken, torn, defect or worn-out. Cleaning the frame Use only mild soapy water or lukewarm water to clean the frame of your high chair. C: D: E: F: G: H: I: j: Frontbar Upper back rest Lower back rest Seat Footrest 2 no. Wooden struts Right framed legs Left framed legs Metal rod Safety belt Fasteners: 1 no. Take care while doing so, that the slots on the transverse threaded bolts face upwards. Connect the wooden struts (F) to the left framed legs (H), by pushing the long metal screw (d) through the lower opening of the framed legs and tightening it with the Allen key. Connect the metal rod (I) to the left framed legs (H) by pushing a short metal screw (c) through the central opening of the framed legs and tightening it with the Allen key. Lay the backrests (B and C) down on the floor with their backs facing upwards. Insert the remaining two transverse threaded bolts (a) into the provided opening on the back rest. Connect the back rests (B and C) to the left framed legs (H) by pushing a long metal screw (d) through the upper opening of the framed legs (H) and tightening it with the Allen key. Caution: the wooden dowels on both ends of the frontbar (A) must be inserted into the holes that are provided for them on the inner sides of the framed legs (G and H). Now connect the back rests (B and C) to the right framed legs (G) by pushing a long metal screw (d) through the opening of the framed legs (G) and tightening it with the Allen key. The frontbar is now seated firmly between both of the framed legs (G and H). [. . . ] Reliez les traverses en bois (F) et le pied de support gauche (H) en introduisant une longue vis en métal (d) dans l`ouverture du bas du pied de support et en serrant avec la clé mâle coudée. Reliez les tiges en métal (I) et le pied de support gauche (H) en introduisant une courte vis en métal (c) dans l`ouverture du milieu du pied de support et en serrant avec la clé mâle coudée. Reliez les dossiers (B) (C) et le pied de support gauche (H) en introduisant une longue vis en métal (d) dans l`ouverture du haut du pied de support (H) et en serrant avec la clé mâle coudée. [. . . ]