User manual HATCO MNM-0702

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HATCO MNM-0702. We hope that this HATCO MNM-0702 user guide will be useful to you.


HATCO MNM-0702 : Download the complete user guide (854 Ko)

Manual abstract: user guide HATCO MNM-0702

Detailed instructions for use are in the User's Guide.

[. . . ] Friday) Telephone: (800) 558-0607; (414) 671-6350 (800) 690-2966 (Parts & Service) (414) 671-3976 (International) Additional information can be found by visiting our web site at www. hatcocorp. com INTRODUCTION The Hatco Macho NachoTM Chip Warmer is designed to hold nacho chips for prolonged periods of time while maintaining that "just-made" quality. Hatco Chip Warmers provide the best environment for food products by regulating the air temperature. Macho Nacho models use hot air only (no moisture) that is circulated through distribution panels at the base. This prevents the loss of natural oils, eliminating the need to frequently replace stale chips. [. . . ] FDW-1-MN Macho Nacho Chip Warmer HOLDING AND DISPLAY CABINET FLAV-R-SAVOR FDW-1-MN MODEL The FDW-1-MN Model is built of stainless steel with tempered glass sides and doors. (11 kg) of chips. FST-1-MN MODEL The FST-1-MN Model is built of stainless steel and aluminum with tempered glass sides and doors. MNM-0702 2 SPECIFICATIONS PLUG CONFIGURATIONS Units are supplied from the factory with an electrical cord and plug installed. Plugs are supplied according to the applications as shown in Figure 3. WARNING Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug configuration. If the plug and receptacle do not match, contact a qualified electrician to determine the proper voltage and size and install the proper electrical outlet. WARNING To prevent any injury, discontinue use if power cord is frayed or worn. NEMA 5-15P BS-1363 CEE 7/7 Schuko Figure 3. Plug Configurations ELECTRICAL RATING CHART Model FDW-1-MN Voltage 100 120 220 240 220-230 (CE) 230-240 (CE) 120 220 240 220-230 (CE) 230-240 (CE) Hertz 60 60 50/60 50/60 50/60 50/60 60 50/60 50/60 50/60 50/60 Watts 1110 1128 1118 1128 1118-1222 1036-1128 1245 1225 1245 1219-1332 1150-1252 Amps 11. 1 9. 4 5. 1 4. 7 5. 1-5. 3 4. 5-5. 7 10. 4 5. 6 5. 2 5. 6-5. 8 5. 0-5. 2 Plug Configuration NEMA 5-15P NEMA 5-15P CEE 7/7 Schuko BS-1363 CEE 7/7 Schuko BS-1363 NEMA 5-15P CEE 7/7 Schuko BS-1363 CEE 7/7 Schuko BS-1363 Shipping Weight 80 lbs. (60 kg) FST-1-MN DIMENSIONS Model FDW-1-MN FST-1-MN Width (A) 18" (46 cm) 22-7/8" (58 cm) Depth (B) 22-3/8" (57 cm) 27" (69 cm) Height (C) 27-1/2" (70 cm) 32-5/8" (83 cm) A B Figure 4. MNM-0702 INSTALLATION SET-UP The Macho NachoTM unit comes pre-assembled and ready for set-up. Before installing decals, clean the stainless steel side panels with a non-oily cleaner, such as isopropyl alcohol (rubbing alcohol). After the cleaned surfaces have dried, simply remove the protective backing from the decal and apply to the panel. Any air pockets or bubbles behind the decal can be removed by rubbing gently with a soft cloth, working from the center of the decal towards the outer edges. WARNING For safe and proper operation, the unit must be located at a reasonable distance from combustible walls and materials. If safe distances are not maintained, discoloration or combustion could occur. CAUTION To prevent injury or damage the unit must be transported in the upright position. CAUTION Locate the unit at the proper counter height, in an area that is convenient for use. The location should be level to prevent the unit or its contents from accidentally falling, and strong enough to support the weight of the unit and food displayed. For safe and proper operation locate the unit indoors where the ambient air temperature is a minimum of 70°F (21°C). Chip Deflector Install chip deflector in slots located behind upper door panel. Floor Panels Decal-Install on upper stainless steel panel. Figure 5. MNM-0702 4 OPERATION ALL MODELS CAUTION Some exterior surfaces on the unit will get hot. Plug warmer into a properly grounded electrical outlet of the correct voltage, size and plug configuration. WARNING Genuine Hatco Replacement Parts are specified to operate safely in the environments in which they are used. [. . . ] Harrisburg 412-787-1970 717-236-9039 503-231-7171 405-528-8883 419-385-9121 CANADA BRITISH COLUMBIA 503-624-0890 Key Food Equipment Service Vancouver 604-433-4484 ONTARIO R. G. Toronto Choquette CKS Ottawa QUÉBEC Choquette CKS Montreal Choquette CKS Québec City 514-722-2000 418-681-3944 416-422-5580 613-739-8458 Comm. Honolulu 808-848-1466 Food Equip Parts & Service Honolulu 808-847-4871 ILLINOIS Parts Town Lombard 708-865-7278 Commercial Kitchen Services St. Louis 314-535-2222 NEBRASKA Anderson Electric Omaha NEVADA Burney's Commercial Las Vegas 702-736-0006 Hi. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HATCO MNM-0702




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HATCO MNM-0702 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.