User manual HATCO LWM-1104(1)

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HATCO LWM-1104(1). We hope that this HATCO LWM-1104(1) user guide will be useful to you.


HATCO LWM-1104(1) : Download the complete user guide (168 Ko)

Manual abstract: user guide HATCO LWM-1104(1)

Detailed instructions for use are in the User's Guide.

[. . . ] Friday) Telephone: (800) 558-0607; (414) 671-6350 Fax: (800) 690-2966 (Parts & Service) (414) 671-3976 (International) 24-Hour 7-Day Parts & Service Assistance available in the United States and Canada by calling (800) 558-0607. Additional information can be found by visiting our web site at www. hatcocorp. com INTRODUCTION Hatco Portable Lamp Warmers are designed to hold your food products at serving temperatures without affecting quality. The LW-2 model incorporates a specially designed stand that keeps food holding pans above the countertop, providing an effective insulation to prolong serving times. The base of the LW-2 holds full-size and half-size Gastronorm pans of appetizers, chicken wings or other hot foods. [. . . ] The warmer has vented, powdercoated lamp shades with heavy-duty sockets and comes equipped with a 6' (1829 mm) cord and plug. The cord and plug set incorporate an in-line On/Off switch located outside the heat zone. The LW-3 may be used as a free standing unit or can be mounted to the top of the Hatco GRSDH-36 Merchandising Display Warmer to provide additional warming space above the unit. LWM-1104 2 SPECIFICATIONS PLUG CONFIGURATION Units are supplied from the factory with an electrical cord and plug installed. (See Figure 3. ) WARNING Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug configuration. If the plug and receptacle do not match, contact a qualified electrician to determine the proper voltage and size and install the proper electrical outlet. NEMA 5-15P CEE 7/7 Schuko BS 1363 Figure 3. Plug Configuration DIMENSIONS Model LW-2 LW-3 Width (A) Depth (B) Height (C) Height (D) 12-1/2" 22" 24" to 29-1/2" 9-1/2" to 15-1/2" (318 mm) (559 mm) (610-749 mm) (241-394 mm) 32-5/8" 12-1/4" (829 mm) (311 mm) 25-1/2" (648mm) 16" (406 mm) D C A B Figure 4. LWM-1104 SPECIFICATIONS ELECTRICAL RATING CHART Model LW-2 Voltage 120 220-230 (CE) 230-240 (CE) 120 220-230 (CE) 230-240 (CE) Watts 500 457 544 750 688 750 Amps 4. 2 2. 0 2. 3 6. 3 3. 0 3. 2 Plug Configuration NEMA 5-15P CEE 7/7 Schuko BS 1363 NEMA 5-15P CEE 7/7 Schuko BS1363 Shipping Weight 16 lbs. (8 kg) LW-3 INSTALLATION UNPACKING The Hatco Portable Lamp Warmers are shipped with most components installed and ready for operation. The following installation instructions must be performed before plugging in and operating. To prevent delay in obtaining warranty coverage, fill out and mail in the warranty card. CAUTION To avoid injury or damage, locate the unit at the proper counter height, in an area that is convenient for use. The location should be level to prevent the unit or its contents from accidentally falling, and strong enough to support the weight of the unit and food. For proper operation and maximum performance, locate the unit in an area where the ambient air temperature is constant and is a minimum of 70°F (21°C). Areas which are susceptible to active air movements or currents should be avoided, i. e. , near exhaust fans or hoods and air conditioning ducts. LOCATION WARNING For safe and proper operation, the unit must be located a reasonable distance from combustible walls and materials. If safe distances are not maintained, discoloration or combustion could occur. WARNING To prevent any injury or damage to the unit do not pull unit by power cord. For safe and proper operation the unit must be located indoors where the ambient air temperature is a minimum of 70°F (21°C) and a maximum of 85°F (29°C). Form No. LWM-1104 4 OPERATION WARNING Some exterior surfaces on the unit will get hot. WARNING To prevent any injury, discontinue use if power cord is frayed or worn. CAUTION Damage to countertop material caused by heat generated from Hatco equipment is not covered under the Hatco Warranty. Contact the manufacturer of the base material for application information. PLACING INTO SERVICE LW-2 MODEL 1. [. . . ] San Francisco COLORADO Hawkins Commercial Appliance Englewood 303-781-5548 DELAWARE Food Equipment Service Wilmington 302-996-9363 FLORIDA Whaley Foodservice Repair Jacksonville 904-725-7800 Universal Restaurant Services Miami 305-593-5488 Nass Service Co. , Inc. Pompano Beach 954-971-0456 650-635-1900 CANADA BRITISH COLUMBIA Key Food Equipment Service Vancouver 604-433-4484 MANITOBA Denko Mechanical Ltd. Toronto Choquette CKS Ottawa QUÉBEC Choquette CKS Montreal Choquette CKS Québec City 514-722-2000 418-681-3944 416-422-5580 613-739-8458 Comm. Appliance Service Tampa 813-663-0313 GEORGIA TWC Services Lake City Heritage Service Group Norcross 866-388-9837 Southeastern Rest. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HATCO LWM-1104(1)




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HATCO LWM-1104(1) will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.