User manual HATCO GRCSM-0401

[. . . ] Glo-Ray warmers have prefocused heat that bathes the entire surface to provide effective heat distribution and eliminate hot spots, keeping all foods at optimum serving temperatures to ensure quality. Ceramic and blanket heating elements are guaranteed against breakage and burnout for one year. This manual provides the installation and operating instructions for the Glo-Ray Carving Station. We recommend all installation, operating and safety instructions appearing in this manual be read prior to installation or operation of your Hatco foodwarmer. [. . . ] Doing so could loosen the internal nut causing it to fall off, thereby making the legs non-adjustable. A B Figure 3. Dimensions INSTALLATION GENERAL The Glo-Ray Carving Stations are shipped with most components installed and ready for operation. The following installation instructions must be performed before plugging in and operating the warmer. BREATH PROTECTOR(S) Models GRCSCL-24 and GRCSCLH-24 use polycarbonate breath protector(s) that shield the food while allowing easy access. Specially designed housings and mounting hardware make installation simple. NOTE: Remove protective paper from polycarbonate surface(s) before mounting breath protector(s). Align the holes in the breath protector with those in the foodwarmer housing and use the screws, acorn nuts and spacers to mount the breath protector(s) to the housing. Breath Protector Installation For proper operation and maximum performance, locate the Carving Station in an area where the ambient air temperature is constant and is a minimum of 70°F (21°C). Areas which are susceptible to active air movements or currents should be avoided, i. e. , near exhaust fans or hoods and air conditioning ducts. The unit should also be located in an area convenient for proper counter height and in accordance with traffic patterns. The Carving Station can sit on top of the Hatco Chef System Cook and Hold 5-pan Oven and the Flav-R-Savor Holding Cabinet. For safe and proper operation, place the foodwarmer a reasonable distance from combustible surfaces. CUSTOM DRIP PAN The custom drip pan fits tightly onto the base of the carving station. LOCATION CAUTION For safe and proper operation, the Carving Station must be located a reasonable distance from combustible walls and materials. If safe distances are not maintained, discoloration or combustion could occur. Form No. GRCSM-0401 4 OPERATION The Carving Station power for the top ceramic heat and the incandescent lights are controlled by the on/off toggle switch. The switch must be in the "ON" position for the unit to function. To control the top heat, set the infinite switch to the desired heating level. For models with heat in the base, power is independently controlled by the on/off rocker switch. Set base control thermostat to the desired heating level as indicated on the control plate. Use caution when touching these areas to avoid injury. Base Control Thermostat On/Off Rocker Switch Figure 5. Controls Heat Control Infinite Switch On/Off Toggle Switch 5 Form No. To preserve the bright finish of the Carving Station, it is recommended that the surfaces be wiped daily with a damp cloth. Stubborn stains may be removed with a stainless steel cleaner or a non-abrasive cleanser. Abrasive cleaners could scratch the finish of your Glo-Ray Carving Station marring its appearance and making it susceptible to soil accumulation. [. . . ] Las Vegas 702-649-4616 NEW JERSEY Jay Hill Repair Fairfield Service Plus Flanders SOUTH CAROLINA Whaley Foodservice Repair W. Columbia 803-791-4420 TENNESSEE Camp Electric Memphis 901-527-7543 973-575-9145 973-691-6300 NEW YORK Acme American Repairs, Inc. Brooklyn 718-386-2515 Appliance Installation Buffalo 716-884-7425 Northern Parts Dist. Syracuse 315-422-9271 NORTH CAROLINA Authorized Appliance Charlotte 704-377-4501 OHIO Akron/Canton Comm. [. . . ]