User manual HATCO GRCD

[. . . ] GLO-RAY ® Heated Display Cases GRCD & GRHD Series Installation & Operating Manual I & W #07. 05. 080. 00 This manual contains important safety information concerning the maintenance, use and operation of this product. Failure to follow the instructions contained in this manual may result in serious injury. If you are unable to understand the contents of this manual, please bring it to the attention of your supervisor. Do not operate this equipment unless you have read and understood the contents of this manual. Este manual contiene importante información sobre seguridad concerniente al mantenimiento, uso y operación de este producto. [. . . ] Install pan rail (GRCD units) or pan skirts and water trough (GRCDH units). Install rear doors and front curved glass. 11 Pan Rail (GRCD models) * 1-Pan models have a hinged door. Figure 8. Adjustable Legs Left Rear Door* Right Rear Door* Door Glides (2 ea. door) Front Curved Glass Pan Divider (GRCDH models) Water Trough (GRCDH models) Pan Skirt (GRCDH models) Figure 9. Remove all doors by grasping the door edges then lifting up and out of the bottom channel. NOTE: If your unit is equipped with optional Slant Leg Kit, see Accessories for installation instructions. CAUTION Do not lay unit on the side with the control panel or the front of a curved glass unit, damage to unit could occur. Use a 9/16" (14 mm) open-end wrench to make leveling adjustments once the unit is placed in final position. Install pan rail (GRHD units) or pan skirt, divider and water trough (GRHDH units). NOTE: If your unit is equipped with optional Sandwich Chutes and/or Display Sign Holder, see Accessories for installation instructions. Pan Divider (GRHDH models) Side Glass Water Trough (GRHDH models) Rear Doors Door Glides (2 ea. door) Pan Rail (GRHD models) Pan Skirt (GRHDH models) Figure 10. If laid on its side, all glass surfaces, pans rails and skirts must be secured with tape, and water must be removed from the unit. CAUTION To prevent any injury or damage locate the unit at the proper counter height, in an area that is convenient for use. The location should be level to prevent the unit or its contents from accidentally falling, and strong enough to support the weight of the unit and food displayed. CAUTION For safe and proper operation, the unit must be located a reasonable distance from combustible walls and materials. If safe distances are not maintained, discoloration or combustion could occur. For safe and proper operation locate the unit indoors where the ambient air temperature is constant and is a minimum of 70°F (21°C). 13 Form No. WARNING To prevent any injury or damage to the unit do not pull unit by power cord. WARNING To prevent any injury, discontinue use if power cord is frayed or worn. WARNING To prevent any injury, do not place food directly on glass or stainless steel surfaces. CAUTION To avoid any injury on GRCD-PDG and GRCDH-PDG series units do not come in contact with the heated glass shelf while unit is in operation. WARNING To avoid any injury, on GRCD-PDG and GRCDH-PDG series units do not allow liquids to spill onto the heated glass shelf. [. . . ] Hatco will not accept the return of any Product without prior written approval from Hatco, and all such approved returns shall be made at Buyer's sole expense. HATCO WILL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES, FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR COSTS OR LOST PROFITS RESULTING FROM THE USE OF OR INABILITY TO USE THE PRODUCTS OR FROM THE PRODUCTS BEING INCORPORATED IN OR BECOMING A COMPONENT OF ANY OTHER PRODUCT OR GOODS. 20 Form No. GRCD/HDM-0703 HATCO AUTHORIZED PARTS DISTRIBUTORS ALABAMA Jones McLeod Appl. Phoenix 602-252-0402 CALIFORNIA Industrial Electric Huntington Beach 714-379-7100 IOWA Electric Motor Service Co. [. . . ]