User manual HASBRO ZOIDS ZABER FANG HOLOTECH

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HASBRO ZOIDS ZABER FANG HOLOTECH. We hope that this HASBRO ZOIDS ZABER FANG HOLOTECH user guide will be useful to you.


HASBRO ZOIDS ZABER FANG HOLOTECH : Download the complete user guide (4380 Ko)

Manual abstract: user guide HASBRO ZOIDS ZABER FANG HOLOTECH

Detailed instructions for use are in the User's Guide.

[. . . ] General information required for loading paper, adding toner, misfeed removal, and operation of peripheral devices are described in that manual. Separate manuals are provided for the operation of network scanning and facsimile functions. Refer to the "Operation manual (for scanner)" and "Operation manual (for facsimile )" for these descriptions. NOTE In this manual, American spellings are used. Original and paper sizes This machine allows use of standard sizes in both the inch and AB systems. The standard sizes available in this machine are shown below. Sizes in the inch system 11 x 17 8-1/2 x 14 8-1/2 x 13 8-1/2 x 11 7-1/4 x 10-1/2 5-1/2 x 8-1/2 Sizes in the AB system A3 B4 A4 B5 A5 1 CONTENTS Page INTRODUCTION . [. . . ] For top binding, touch the [BINDING CHANGE] key on the 2-sided copy selection screen. 14 EXPOSURE ADJUSTMENTS Select the exposure mode to be consistent with the type of originals to be copied. The selections are AUTO, TEXT, TEXT/PHOTO and PHOTO. s Automatic exposure adjustment 0 AUTO EXPOSURE The automatic exposure mode is the default initial setting for this machine. In this mode, the characteristics of an original being copied are "read" by the exposure system, and exposure adjustments are made automatically. To select an exposure mode more suitable for originals to be copied or to adjust the exposure manually, follow the procedure below. s Exposure mode selection and manual exposure adjustment 1 Touch the [EXPOSURE] key. 0 3 Adjust the exposure level. 1 3 5 Touch the key to make darker copies. Touch the key to make lighter copies. AUTO EXPOSURE AUTO 8 X 11 1 / 2 Select [TEXT], [TEXT/PHOTO] or [PHOTO] based on the original to be copied. TEXT TEXT / PHOTO PHOTO NOTE Exposure mode selection TEXT: This mode is useful for producing dark text copies with minimum background. TEXT/PHOTO: This provides the best balance for copying an original which contains both text and photos. PHOTO: This mode provides the best copies of photographs with fine details. NOTE Exposure levels in the text mode 1 to 2: Dark originals such as newspaper 3: Normal density originals 4 to 5: Originals written with pencils or light color characters After adjusting the exposure, follow any of the copying procedures. To return to the automatic exposure mode, touch the [EXPOSURE] key and select [AUTO]. The automatic exposure level can be adjusted using a key operator program. (page 33) 15 REDUCTION/ENLARGEMENT/ZOOM Reduction and enlargement ratios can be selected either automatically or manually as described in this section. q q Automatic selection will enlarge or reduce images based upon the original size and copy paper size to give the best possible fit of the image to the copy paper. There are three preset reduction ratios (25%, 64% and 77%) and three preset enlargement ratios (121%, 129% and 400%) available for the inch system. There are four preset reduction ratios (25%, 70%, 81%, 86%) and four preset enlargement ratios (115%, 122%, 141%, 400%) available for the AB system. Automatic selection (auto image) The reduction or enlargement ratio will be selected automatically based on the original size and the selected pape size the original in the document 1 Placethe document glass. any of the copying procedures. To cancel the margin shift function, touch the [CANCEL] key on the margin shift setting screen. 20 SPECIAL FUNCTIONS Erase The erase function is used to erase the shadow lines on copies produced when copying thick originals or books. The erase width is approximately 1/2" (10 mm) in it's initial setting. Original Copy Edge erase Eliminates shadow lines around the edges of copies caused when thick paper or a book is used as an original. Center erase Eliminates shadow lines produced by the bindings of bound documents. Edge + center erase Eliminates shadow lines around the edges of copies and eliminates the shadow at the center of copies. 1 Touch the [ERASE] key on the SPECIAL MODES screen. The erase setting screen will appear. Touch the [OK] key on the special 4 After adjusting the exposure, followmodes screen. any of the copying procedures. ERASE JOB BUILD 2 Select the desired erase mode. ERASE EDGE ERASE CENTER ERASE EDGE+CENTER ERASE Select one of the three erase modes. The selected key will be highlighted. 3 Adjust the amount of erase and touch the [OK] key. CANCEL EDGE OK (0 20) Use the and keys to adjust the erase width and then touch the [OK] key. 10 mm To cancel the erase function, touch the [CANCEL] key on the erase setting screen. 21 SPECIAL FUNCTIONS Dual page copy The dual page copy function produces separate copies of two documents placed side by side on the document glass. [Example] Copying right and left pages of a book Book original Dual page copy q The dual page copy function can be used with reduction copying but cannot be used with enlargement copying. Only 8-1/2" x 11" or A4 paper can be used. q q When copying book originals: Index 81/2 x 11 or A4 This page is copied first. Center line of original When copying a thick book, press down lightly on the document cover. PAGE 1 Touch the [DUALscreen. COPY] key on the SPECIAL MODES The [DUAL PAGE COPY] key will be highlighted. 4 Ensure that 8-1/2" x 11" or A4 size paper is selected. AUTO A4 PAPER SELECT 100% OPY RATIO If 8-1/2" x 11" or A4 size paper is not selected, touch the [PAPER SELECT] key to select 8-1/2" x 11" or A4 size paper. DUAL PAGE COPY MULTI SHOT 2 Touch the [OK] key on the special modes screen. OK DUAL PAGE COPY After adjusting the exposure, follow any of the copying procedures. When copying onto two sides of paper, follow steps 2 to 4 on page 14 and then follow steps 4 to 7 on page 13. When copying onto one side of paper, follow steps 4 to 7 on page 13. To cancel the dual page copy function, touch the [DUAL PAGE COPY] key on the special modes screen (step 1). (The highlighted display will be canceled. ) 3 Place the originals on the document glass. NOTE To erase shadows caused by document binding, use the edge erase function (page 21). 22 SPECIAL FUNCTIONS Pamphlet copy The pamphlet copy function is used to arrange copies in proper order for eventual center-stapling and folding into a booklet. [Example] Copying eight originals in the pamphlet copy mode Originals (one-sided) Finished copies are folded in two. [. . . ] q Is the copy ratio proper for the original and paper sizes? q Is the original placed face down?q Is the order of originals correct? Job cancelation needed Scanning of originals is incomplete. q Is a message requesting cancelation q Is of job displayed?a message indicating memory is full displayed? 30 SPECIFICATIONS Copier Resolution Gradation Originals Copy sizes Scan: 600 dpi or 300 dpi, output: 600 dpi Scan: 256 levels, output: 2 levels Sheets, bound documents Maximum size: 11" x 17" or A3 Max. 5-1/2" x 8-1/2" or A5 Image loss: Max 21/64" or 8 mm (leading edge and trailing edge in total), max. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HASBRO ZOIDS ZABER FANG HOLOTECH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HASBRO ZOIDS ZABER FANG HOLOTECH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.