User manual HASBRO ZOIDS SPINOSNAPPER WIND UP MOTOR 83199-83095

[. . . ] (This sentence is not applicable in any country where the above directives are not required. ) CONTENTS GETTING STARTED q Page GETTING STARTED INTRODUCTION The SF-1116 and ZOIDS SPINOSNAPPER WIND UP MOTOR 83199-83095 copiers are designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. Their main features are: q Space conservation with a fixed platen and a front-loading paper tray q Easy operation q Automatic exposure control q PHOTO mode copying q Convenient functions such as DUAL PAGE COPYING, MARGIN SHIFT, EDGE ERASE, and INTERNAL AUDITOR q Power savings with preheat and auto power shut-off modes The machine can also be equipped with an optional automatic document feeder (ADF) for automatic feeding of original documents and an optional sorter or staple sorter to provide finished copy sets ready for distribution. To ensure optimum use of all copier functions, please familiarise yourself with this manual and the copier. Be sure to keep this manual available for quick reference during copier operation. q q q A WORD ON COPIER INSTALLATION . . . . . . . . . . . . . [. . . ] If a mistake is made in steps 2 to 4, press the clear ( You will return to step 2. For example, to change the setting of the auto clear time, press key 1. Program name Auto clear time Preheat mode Auto power shut-off timer Auto power save control Stream feeding mode Sorter bin access mode Auditing mode Account number entry Account number change Account number deletion Number of copies per account Resetting account Auto power shut-off setting Program No. 1 2 3 4 5 7 10 11 12 13 14 15 20 GENERAL INFORMATION q ) key. 9 % q For operation of these programs after step 3, see page 33. User programs 3 ZOOM Press the print ( q ) button. For programs 1 to 7 and 20, the entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side. For programs 10 to 15 (programs for auditing accounts), the display varies with the program number. See page 33 for setting programs 10 to 15. % q 31 USER PROGRAMS 1 4 7 0/ 2 5 8 C 3 6 4 ZOOM Select the desired parameter using the 10-key pad. q The entered parameter number will blink on the right side of the copy quantity display. For example, to change the setting of the auto clear time to "90 sec. ", press key 3. q 9 % Program name Auto clear time Preheat mode Auto power shut-off timer Auto power save control Stream feeding mode Sorter bin access mode Auto power shut-off setting Parameters 0 e OFF 3 e 90 sec. 6 e 240 min. Factory default settings are indicated with an asterisk (*). NOTE: If you select "0" (OFF) in a program, the corresponding function will be disabled. GENERAL INFORMATION User programs A3 A4 A4 R A5 B4 81/ 2 !13 EXTRA 5 C Press the print ( q ) button. The right-hand number in the copy quantity display will be steadily lit and the entered value will be stored. A4 6 To continue with other user programs, press the key and then repeat steps 2 to 5. To exit the user program mode, press the TRAY SELECT ( ) key. q All the alarm indicators will go out. A4 32 USER PROGRAMS Setting for auditing accounts Setting of user programs No. q If no account number has been registered, "13E" will appear in the copy quantity display. You will return to step 2 on page 31. GENERAL INFORMATION User programs 1 4 7 0/ 2 5 8 C 3 6 1. Press the print ( q ) button. 9 If you have pressed key 0 in step 1, an account number will appear in the copy quantity display. Use the copy ratio display ( account number to be deleted. ZOOM q ) key to select the Use the key to advance through the account numbers. % 4. Press the print ( q ) button. The specified account will be deleted. 5. 14 is used to display the total number of copies made against each account number. 14 is entered, an account number will appear in the copy quantity display. q If no account number has been registered, "14E" will appear in the key. Use the copy ratio display ( account number. ZOOM q ) key to select the Use the key to advance through the account numbers. % ZOOM % 1 4 7 0/ 2 5 8 C 3 6 2. Press and hold the 0 key. q 9 The number of copies made against the specified account number will be displayed. The two higher digits ("­" is displayed before the two digits. ) and the three lower digits will appear alternately while the 0 key is pressed. w w Example: 1, 234 copies q The upper limit for the number of copies is 49, 999. If the number of copies made reaches 50, 000, the number will be reset to 0 and counting will start again from 0. 3. [. . . ] To check that the stapler works properly, copy an original and staple it. 57 10-BIN STAPLE SORTER (SF-S54) Staple jam removal 1 Open the stapler cover. 2 Close the stapler cover. q Jammed staples will be removed automatically. 3 Remove all copies from the bins of the staple sorter. q 10-bin staple sorter (SF-S54) OPTIONAL EQUIPMENT To check that the stapler works properly, copy an original and staple it. 58 10-BIN SORTER (SF-S17N) Misfeed removal The copier will stop when a misfeed occurs. The misfeed ( ) indicator will blink and blinking red misfeed location indicators will indicate the approximate misfeed location. SF-S17N 10-bin sorter 1 Pull the sorter lock lever and carefully slide the sorter away from the copier. 2 Remove the misfed paper from the sorter or from the exit area of the copier. 10-bin sorter (SF-S17N) 3 4 Slide the sorter back toward the copier and latch it into place. Open and close the front cover to cancel the q OPTIONAL EQUIPMENT indicator. If the indicator is still blinking, check the inside of the copier and remove any remaining misfed paper. 59 10-BIN STAPLE SORTER (SF-S54) SF-S54 10-bin staple sorter 1 Pull the sorter lock lever and carefully slide the staple sorter away from the copier. 2 Remove the misfed paper from the staple sorter or from the exit area of the copier. 10-bin staple sorter (SF-S54) 3 4 60 Slide the staple sorter back toward the copier and latch it into place. Open and close the front cover to cancel the q OPTIONAL EQUIPMENT indicator. If the indicator is still blinking, check the inside of the copier and remove any remaining misfed paper. 10-BIN SORTER (SF-S17N)/10-BIN STAPLE SORTER (SF-S54) Specifications SF-S17N No. [. . . ]