User manual HASBRO ZOIDS SHIELD LIGER 83191

[. . . ] When moving the unit, be sure to turn the power switch off and remove the power cord from the outlet. Do not cover the unit with a dust cover, cloth or plastic film while the power is on. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The socket-outlet shall be installed near the unit and shall be easily accessible. [. . . ] This is done by changing the Windows device settings for the AL-xxxx (where xxxx is the model name of your unit) in the Scanner and Camera device settings in the Control Panel. Windows Platforms provide a mechanism for software to handle external events for a scanner device like the HASBRO AL-xxxx (where xxxx is the model name of your unit) series products. this mechanism is controlled by the device manager on a device basis. Applications that can handle events from a scanner/camera device register with the Windows Event Manager and shown as available in the registered applications. The path an event takes to get to the user's selected application depends upon the event settings for the device. Scanner ALxxxx (where xxxx is the model name of your unit) SCANNER key pressed. Shown are two applications registered to handle the scanner event from the AL-xxxx (where xxxx is the model name of your unit) device. Using the SCANNER key to begin scanning Scanning is not possible during a copy job. If the SCANNER ( ) key is pressed during a print job, the scan job will be stored. When scanning an original that has been placed in the SPF/RSPF, only one original can be placed unless you are using Sharpdesk. Press the right copy quantity key to display the number of the application that you wish to use for scanning. To use the HASBRO Personal MFP series again, perform the same procedure but select the port to be used (for example, LPT1) in step 4. Interface cables for connecting the unit to your computer are not included with this unit. If you intend to use the unit as a scanner, it must be connected to your computer with a USB interface cable. The scanner function cannot be used if the unit is connected with a parallel cable. USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled. Do not connect the interface cable before installing the MFP driver. The interface cable should be connected during installation of the MFP driver. Insert the other end of the cable into the interface connector of your computer, or the USB hub connected to your computer. Insert the cable into the parallel interface connector located on the rear of the unit, and fasten with clasps. Insert the other end of the cable into the interface connector of your computer. This memory allows the unit to scan an original once only and make up to 99 copies. [. . . ] The software and related documentation are provided "AS IS" and without warranty of any kind and HASBRO and HASBRO'S Licensor(s) (for the purpose of provisions 7 and 8, HASBRO and HASBRO'S Licensor(s) shall be collectively referred to as "HASBRO") EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In no event shall HASBRO'S total liability to you for all damages, losses, and causes of action (whether in contract, tort (including negligence) or otherwise) exceed the amount paid by you for the Software. For a portion of the Software related with Apple Macintosh and Microsoft Windows, this license shall be governed by and construed in accordance with the laws of the state of California and Washington, respectively. If for any reason a court of competent jurisdiction finds any provision of this License, or portion thereof, to be unenforceable, that provision of the License shall be enforced to the maximum extent permissible so as to effect the intent of the parties, and the remainder of this License shall continue in full force and effect. [. . . ]