User manual HASBRO ZOIDS MISSILE TORTOISE Z-BUILDERS

[. . . ] Explanations regarding scanner functions assume that the Network Scanner Expansion Kit (AR-NS2) has been installed. Explanations regarding fax functions assume that the Fax Expansion Kit (AR-FX4) has been installed. A "Multi Access Operation Manual" is also included in the Fax expansion kit (AR-FX4), however, please refer to this manual. What is Multi-Access? "Multi-Access" means using one function while another function is being used. During copying Print data is received Printing Printing Fax data is received Time Definitions of Terms Job A job is a copy, fax, print, or scan operation that the machine performs. Electronic sort copy job An electronic sort copy job refers to the sort/group, staple sort, 2in1/4in1 copy, edge erase, binding change, and rotation copy functions. ROPM ROPM is an acronym for "Rip Once Print Many" processing. The ROPM function stores multiple pages of print data in memory before printing. [. . . ] the machine does not have the fax feature, the print job status menu appears when the JOB STATUS key is pressed from print or scan mode. Conditions in which the job status menu cannot be displayed The job status menu cannot be displayed when the machine is in the following states. G A key operator program is being used. 5 Multi-Access Displaying the print job status menu The job type, job status, paper tray, and paper size appear in the print job status menu. The procedure for displaying the print job status menu from copy mode is explained here. 1 2 Press the JOB STATUS key. ( Select "JOB OUTPUT" with the key. G The page 5) key and then press the OK print job status menu appears. Contents of the print job status menu Use the key to move through the print job status menu. For example, the following display shows the print job icon for the job type, "WAITING" for the job status, and "TRAY 1:A4" for the tray and paper size. Example: JOB OUTPUT WAITING TEXT/FOTO TRAY1:A4 [OK]:CHANGE OUTPUT Job types Print job Fax print job Job status NONE PRINTING WAITING NO PAPER EXIT FULL PROCESSING NO STAPLES There are no print jobs. The job is waiting or interrupted because another job is being printed. The job is interrupted because there are no staples. PRINT DISABLED Printing is not possible because a paper misfeed has occurred, there is no more toner, or the drum life is over. NO TRAY A tray with the selected paper size has not been set. Paper tray and paper size The paper tray and paper size used for the job are displayed. However, if the job status is "NO TRAY", only the paper size appears. 6 Multi-Access Operation Procedures for Using Multi-Access 1) Interrupting a copy job 1 Press the INTERRUPT key during a copy job. G Copying stops temporarily and the job can be interrupted. Details can be found in the operation manual for the unit. 2) Changing to a different print job during a copy job or auto print job The procedure for changing to a print job during a copying job is explained here. 1 2 3 4 Press the JOB STATUS key. G Any job that does not use the RSPF is possible. 10 Operation when an error occurs Out of toner The display shows "Add toner. However, the mode cannot be changed if the toner runs out during a copy job. In this case, you can press the CLEAR ALL key or CLEAR key to cancel the job, and then change the mode. The display reverts to the display of the currently selected mode when any key is pressed. Notes G When the error is cleared, the job that was in progress before the error occurred resumes. G If a scan job or fax scan job is in progress when the error occurs, the job continues. Out of paper A message appears in the display prompting you to add paper to the tray that ran out of paper. However, if you run out of paper during a copy job, the mode cannot be changed. In this case "Add paper" appears in the display, and the mode can be changed if you cancel the job by pressing the CLEAR ALL key or the CLEAR key. G Fax scan jobs and scan jobs are possible, and transmission is possible. Out of paper during a print job or fax print job G If paper runs out during a print job, a message appears in the display prompting you to add paper to the tray that is out of paper. You can also use the keys to select "BYPASS-TRAY" or "CANCEL JOB". [. . . ] However, if the exit tray became full during a copy job, the mode cannot be changed. In this case, you can press the CLEAR ALL key or the CLEAR key to cancel the job and then change the mode. G In fax mode or print mode, operation is the same as "Out of paper". Notes G When G If the error is cleared, the job that was in progress before the error occurred resumes. [. . . ]