User manual HASBRO ZOIDS GUN SNIPER

[. . . ] IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation. PostScript® is a registered trademark of Adobe Systems Incorporated. All other trademarks and copyrights are the property of their respective owners. INSTALLATION REQUIREMENTS Improper installation may damage this product. Please note the following during initial installation and whenever the machine is moved. 1. [. . . ] If selection of a number is mistaken during setting operation, press the [BACK/C] key to correct the selected number. 4 Press the [OK] key. 3-2 MAKING CONFIGURATION SETTING When the machine is being operated from the touch panel on a scanner module: on 1 Touch the [CONDITION SETTINGS] keythe the printer screen to display configuration setting menu screen. Any print jobs held in the printer and any job currently transmitted to the printer will be printed in the former print conditions. desired setting 3 Touch thethe desired item on the setting screen of and touch the [OK] key. To set another item, repeat steps 2 and 3. CONDITION SETTINGS 4 To finish the setting operation, touch the [EXIT] key. CONDITION SETTINGS DEFAULT SETTINGS DEFAULT SETTINGSPCL SETTINGS PCL SETTINGS PostScript SETTINGS PostScript SETTINGS 2 Touch the key of the desired item to display its setting screen. CONDITION SETTINGS DEFAULT SETTINGS DEFAULT SETTINGSPCL SETTINGS PCL SETTINGS PostScript SETTINGS PostScript SETTINGS 3 Detailed descriptions for configuration setting start on the next page. Supplementary explanation of key operation for configuration setting (when using the touch panel) These keys and indicator are available on setting screens that require the entry of numerical values. 20 DEFAULT SETTINGS OK SMOOTHING ORIENTATION DEFAULT OUTPUT TRAY P COPIES DEFAULT PAPER SIZE DEFAULT PAPER TYPE 1 A4 1/2 (1-999) The name of the configuration category or particular item to be set will appear on the touch key. A box with a check mark means the function is "on" (enabled) and an unchecked box means the function is "off" (disabled). If a configuration step requires more than one screen to display all available settings for a configuration step, [ ] and [ ] arrow touch keys on the setting screens allow access to the available selections on all screens. If a selection is accepted on one of the screens by a press of the [OK] key, the display will return through the previous selection screens within the same setting step to confirm the settings. After all settings are confirmed, the [OK] key must be pushed again to advance to the next step. Numerical values can be set by touching the [ ] and [ ] keys. 3-3 MAKING CONFIGURATION SETTING Default settings The default settings allow detailed print conditions to be set for printing without any printer driver (for example, printing from MS-DOS and printing from a computer without any printer driver installed). NOTE When some items can be set both in the printer driver and on the operation panel, the values set in the printer driver override those set on the operation panel. For items that can be set in the printer driver, perform setting in the printer driver. Smoothing SMOOTHING reduces jaggies seen at roundish curved portions of characters and images to be printed and improves pseudo resolution. Default setting: On Smoothing on or off can be selected. Default paper type The paper type to be used for printing in the normal conditions is set. Printing will be performed onto the specified type paper unless otherwise specified. Default setting: PLAIN Plain paper, pre-printed paper, recycled paper, transparency film letter head paper, pre-punched paper or color paper can be set. Copies COPIES is set when the number of copies to be printed is set. When using the operation panel with touch panel, select the number that corresponds to the desired symbol set and register it. PostScript settings This setting specifies whether an error page describing the cause of an error is printed or not when a PostScript error has occurred. Selections are available to choose printing or not printing of error pages. Default setting: Not print 3-5 CUSTOM SETTINGS Custom settings are used for various settings based on the customer operating conditions. (See page 3-8. ) List print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (See page 3-8. ) Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Used to switch automatically the paper tray of the same paper size when paper runs out in continuous printing. For the items below, detailed setting procedure is described in the facsimile operation manual. Used to register destination E-mail addresses, fax numbers, and Internet fax addresses. Also group entry, memory box entry, custom index entry, and scanner sender entry can be set. Setting programs are provided for key operators (administrators of this machine). If this product is equipped with a scanner module, this key will appear in the CUSTOM SETTINGS menu screen. [. . . ] For the password to be entered, contact your dealer. Store current configuration Use this program to store the current configuration settings (page 3-2), default settings and interface settings of the key operator programs (pages 6-11 and 6-12) in the printer's nonvolatile memory. To recall the stored settings, use the program "Restore configuration" below. Restore configuration Use this program to recall the configuration settings that have been stored in the printer's nonvolatile memory by the program "Store current configuration" above. 6-14 CHAPTER 7 APPENDIX Page PRINTER SPECIFICATIONS . 7-2 7-3 7-4 7-5 7-6 7-7 7-11 7-1 PRINTER SPECIFICATIONS Type Print system Exposure system Developer system Paper feed system Fusing system CPU Memory capacity (standard) DIMM slots for additional memory Page description language Resident font Desktop (can be upgraded to console type if an optional stand is installed. ) Electrophotographic system Semiconductor laser diode system Magnetic brush development Paper trays Heat roller 64 bit RISC, 200 MHz 32 MB/(64 MB for models with a multi-function controller board) One (64 MB to 256 MB memory can be mounted. ) PCL6, PCL5e, PS3 emulation* Outline font: 46 (including Line printer font) PostScript compatible font: 136* *An optional PS3 expansion kit is needed. [. . . ]