User manual HASBRO ZIP UNCLE REMUS GAME098

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HASBRO ZIP UNCLE REMUS GAME098. We hope that this HASBRO ZIP UNCLE REMUS GAME098 user guide will be useful to you.


HASBRO ZIP UNCLE REMUS GAME098 : Download the complete user guide (511 Ko)

Manual abstract: user guide HASBRO ZIP UNCLE REMUS GAME098

Detailed instructions for use are in the User's Guide.

[. . . ] 28 Setting Auto Logout Time (ADVANCED[1]Auto Logout Time) . . . . . . . . . . . . . 28 Carrying out Network Ping Test (ADVANCED[5]Network Ping Test) . . . . . . . . . . . . 29 Setting of Accept IP Address (ADVANCED[6]Accept IP Addr(1) ­ [8]Accept IP Addr(3)) . . . . . . . . . . . . . . . . . 29 Accepting All IP Addresses (ADVANCED[9]Accept All IP Addr) . . . . . . . . . . . . [. . . ] The name set here appears in the "Originator Name" column of the body of the message. Data Port Originator E-mail Address Originator Name Search Port After clicking the "Apply" button, the set values appear. Confirm that the values are set properly, and then click the "Confirm" button. Note · SMTP Server, Originator E-mail Address and Originator Name can be up to 64 characters. · You can input the characters below: SMTP Server and Originator E-mail Address : a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, |, }, ~, _, ', . , @, ` (You can input "@" only one time for "Originator E-mail Address". ) Originator Name : a-z, A-Z, 0-9, -, _, (, ), space · If the settings of "3. Setting up a Network Connection for the Monitor" on pages 14 and 15 are incorrectly set, e-mail will not be send. Note · After setting items, wait for 10 seconds and then re-access. · You can input the characters below : A-Z, 0-9, -, _, (, ), space (When "a-z" are input, they are converted to "A-Z" automatically. ) -19 Controlling the Monitor via LAN Setting Error Items and Destination Addresses to which E-mail is to be Sent when an Error Occurs (Mail ­ Recipient Settings) Setting Error Items and the URL that are to be Displayed when an Error Occurs (Service & Support ­ Access URL) On this screen, you can input e-mail destinations to which error notification (error items) e-mails are sent. Items E-mail Address Description Set addresses to which error notification e-mail is sent. Error Mail Error e-mail is sent on the error (Backlight, items checked in their check Temp. ) boxes. This allows you to confirm that the settings for e-mail transmission are properly set. On this screen, you can make settings of the URL and error items that are to be displayed when the monitor has generated an error. Items Access URL Description Set the URL that is to be displayed when an error occurs. Condition The URL is displayed when an (Backlight, error checked in their check Temp. ) boxes occurs. This allows you to confirm that the URL site is properly displayed. Note · E-mail Address can be up to 64 characters. · You can input the characters below : a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, |, }, ~, _, ', . , @, ` (You can input "@" only one time. ) · For details about error items, refer to the monitor's operation manual. -20 Setting up the Monitor Using RS-232C or Telnet Connect the monitor to a computer using RS-232C or Telnet, and open the SETUP MENU on the computer to carry out various settings for the monitor. When Connecting Using RS-232C 7 Input "setup" and press the "Enter" key. · SETUP MENU will be displayed. 1 2 Launch general purpose terminal emulator. Input settings for the RS-232C port of the terminal emulator as follows. Baud Rate Data Length Parity Bit Stop Bit Flow Control : 9600 bps* : 8 bit : None : 1 bit : None SETUP MENU ---------------------------------SETUP MENU-------------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Monitor Name [8]DHCP Client [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup> Note · User name and password are not set in the factory default settings. 3 Enter "v" and press the "Enter" key to verify setting detail list. IP address is being changed (*3). Note · Verification of setting detail list can be omitted. · Setting details are not effective until they have been saved. (Page 25) · If an invalid number is entered, an error message ("Parameter Error!") will be displayed. -24 Setting up the Monitor Using RS-232C or Telnet Save Settings and Quit ([S]Save & Quit) Save set values and quit menu. SETUP MENU ---------------------------------SETUP MENU-------------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Monitor Name [8]DHCP Client [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup>s All Connection will be disconnect. y Apply New setting. . . Done. Quit without Saving Settings ([Q]Quit Unchanged) Quit menu without saving setting values. SETUP MENU ---------------------------------SETUP MENU-------------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Monitor Name [8]DHCP Client [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged 1 2 setup>q Quit Without Saving(y/n)?y Setting Unchanged. 1 2 1 Enter "s" and press the "Enter" key. 2 Enter "y" and press the "Enter" key. 1 Enter "q" and press the "Enter" key. 2 Enter "y" and press the "Enter" key. -25 Setting up the Monitor Using RS-232C or Telnet The setting procedure for each item will be explained. [. . . ] Turn on the monitors first, then turn on the computers and the video equipment. -38 Troubleshooting Communication cannot be established with the monitor When connecting the monitor using serial-connection \ Check that the RS-232C terminal of the monitor and a computer or the commercially available controller are connected correctly. \ Check that the RS-232C port setting for the monitor corresponds to the setting for the computer or the commercially available controller. When connecting the monitor to a computer using network (LAN)-connection \ Check that the cable's connector is firmly inserted in the LAN terminal of the monitor. \ Check that the cable is firmly inserted into a LAN port for a computer or a network device such as a hub. \ Check that the LAN cable is a cross-over cable when connecting the monitor to a computer directly. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HASBRO ZIP UNCLE REMUS GAME098




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HASBRO ZIP UNCLE REMUS GAME098 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.