User manual HASBRO YAHTZEE CHALLENGE

[. . . ] When moving the unit, be sure to turn the power switch off and remove the power cord from the outlet. Do not cover the unit with a dust cover, cloth or plastic film while the power is on. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The socket-outlet shall be installed near the equipment and shall be easily accessible. [. . . ] Open and close the original cover to clear the SPF misfeed ( ) indicator. (B) Open the original cover and rotate the roller rotating knob to remove the misfed original from the exit area. (C) If the original does not move easily into the exit area, remove it in the direction of the arrow while rotating the knob. A number may appear in the display after a minus sign, indicating the number of the originals that must be returned to the original feeder tray. ) indicator and Open and close the SPF to clear the SPF misfeed ( then clear the misfeed and return the required number of originals. When the developer replacement required ( ) indicator lights up, the developer should be replaced. dEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY AN AUTORIZED HASBRO SERVICE TECHNICIAN. When maintenance ( ) indicator lights up, service by an authorised HASBRO service technician is required. Some of the names that appear in these illustrations may differ slightly from the screens that appear in other operating systems. Means the supplied CD-ROM with the HASBRO Personal MFP series software. The screens shown in this manual are the screens that appear when "English (United Kingdom)" is selected for the language during installation. If the language selection screen appears after you double click the "setup" icon, select the language you wish to use and click the "Next" button. If you are using the parallel interface connection, do not select the Button Manager checkbox because this feature is not supported with the parallel interface. 38), and then select only appropriate the software packages to be installed. Copying files for MFP driver installation and parallel interface setup (This step will start if it was selected in step 4). After confirming the message in the "Welcome" window, click the "Next" button. A dialog box appears asking you to verify that the USB or parallel interface cable is not connected to the MFP. Make sure that the interface cable is not connected and click the "Next" button. Click the "Next" button in the dialog box to install the MFP driver or Cancel to quit the installation. If the following screen appears while the files are being copied (the message may appear more than once), click "Continue Anyway". Begin installation of the Button Manager (This step will start if it was selected in step 4). After confirming the message in the "Welcome" window, click the "Next" button. [. . . ] You may not modify, network, rent, lease, loan, distribute or create derivative works based upon the Software in whole or in part. You may not electronically transmit the Software from one computer to another or over a network. You may terminate this License at any time by destroying the Software and related documentation and all copies thereof. This License will terminate immediately without notice from HASBRO and/or HASBRO's Licensors if you fail to comply with any provision of this License. [. . . ]