User manual HASBRO XRC PRO SPEED

[. . . ] To return to the previous link, click the ( ) button on the menu bar of the Acrobat Reader. CONTENTS INDEX 1 Takes you forward page by page. Following links Links can connect parts of a document to other parts for further information. To follow a link, select a hand tool ( ), a zoom tool or a selection tool. Position the pointer over the linked area on the page until the pointer changes to a hand with a pointing finger ( ). Using Bookmarks This online manual has Bookmarks on the main pages of each section. [. . . ] It is recommended to set Caution the scanning preferences depending on the type of the original to be scanned, i. e. , Text, Text/Graphics, Photograph, Colour, Black & White. 7 Click the "Scanning" button after setting your preferences. The procedure for scanning using Paint is explained in the following. If you have WIA drivers for other devices installed in your computer, the "Select Device" screen will open. Select "HASBRO XRC PRO SPEED" and click the "OK" button. Reference: For information on setting an original for scanning, refer to "ORIGINAL PLACEMENT" in the Operation Manual. After starting Paint, click the "File" menu and select "From Scanner or Camera". The scan screen of the WIA driver will appear. Click here. Click here. CONTENTS INDEX 15 3 3 Scanning an Image from a WIA-Compliant Application (Windows XP) (part 2) Select picture type, and click the "Preview" button. The preview image will appear. 4 Click the "Scan" button. Use "Save" in your application to select a file name and folder for the scanned image, and save the image. To cancel your scanning job after clicking the "Scan" button, click the "Cancel" button. Note To view Help for a setting, click the ( ) button in the upper right-hand corner of the window and then click the setting. CONTENTS INDEX 16 3 1 2 3 Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 1) Place the original on the original table. The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner and Camera Wizard" lets you scan an image without using a WIA-compliant application. 4 Click the "Next" button. Reference: For information on setting an original for scanning, refer to "ORIGINAL PLACEMENT" in the Operation Manual. Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras". Click the "HASBRO XRC PRO SPEED" icon and then click "Get pictures" in "Imaging Tasks". The "Scanner and Camera Wizard" will appear. CONTENTS INDEX 17 3 5 Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 2) Select the "Picture type", and click the "Next" button. You can click the "Preview" button to display the preview image. 6 Specify a group name, format and folder for saving the image, and then click the "Next" button. To set the parallel port mode to a mode other than EPP mode, refer to your computer manual or ask the manufacturer of the computer. If you are using Windows XP, the "Found New Hardware Wizard" may appear after you change the port setting. In this case, click the "Cancel" Caution button to close the wizard, and then reinstall the printer driver as explained in "INSTALLING THE SOFTWARE" in the Operation Manual. Reference: Plug and Play Screen does not Appear (when the USB is connected) CHECK1 Is there enough computer memory or hard disk space? To use this unit, you must have an adequate amount of hard disk space. If there is insufficient hard disk space, delete unnecessary files to increase the free space of the hard disk. If there is insufficient memory, close unnecessary applications to increase memory available for printing or scanning. If you are still unable to print or scan, install more memory into your computer. CHECK2 Is your hard disk fragmented? When data is frequently stored/deleted, the hard disk may become fragmented causing a reduction in printing or scanning speed. You may use the Windows tools or a commercially available hard disk defragmenting tool. CONTENTS INDEX 24 4 1 2 Plug and Play Screen does not Appear (when the USB is connected) Click the "start" button, click "Control Panel", and then click "Performance and Maintenance". On Windows 98/Me/2000, click the "Start" button, select "Settings", and then click "Control Panel". Click "System", click the "Hardware" tab, and click the "Device Manager" button. "Universal Serial Bus controllers" will appear in the list of devices. If the Plug and Play screen does not appear after you connect the unit to your computer with a USB cable and turn on the power of both devices, follow the steps below to verify that the USB port is available. 3 Click the ( ) icon beside the "Universal Serial Bus controllers". Two items will display, your Controller chipset type and Root Hub. If the "Universal Serial Bus controllers" shows a yellow exclamation point or does not appear, you must check your computer manual for USB troubleshooting or contact your computer manufacturer. 4 When you make sure that the USB port is enabled, install the software, referring to "INSTALLING THE SOFTWARE" in the Operation Manual. Note ! [. . . ] In this case, delete HASBRO Personal MFP series software and then reinstall it. Reference: Uninstalling HASBRO Personal MFP Series Software Check here. CONTENTS INDEX 29 4 Poor Scanning Result CHECK4 Have you adjusted the brightness and contrast suitably? If you are scanning with a TWAIN-compliant application and the resulting image has unsuitable brightness or contrast (for example it is too bright), activate the "Auto Contrast/Brightness Adjustment" setting on the "Main" tab of the "Professional" screen. Click the "Brightness/Contrast" button to adjust the brightness and the contrast viewing the scanned output image on the screen. If you are scanning with a WIA-compliant application or the "Scanner and Camera Wizard", click "Adjust the quality of the scanned picture" or the "Custom settings" button, and adjust the brightness and contrast in the screen that appears. If you get poor quality as a result of a scanning job, and you cannot improve the quality by changing preferences, refer to the check list shown below. In addition, make sure that the original table is also clean. CHECK2 Have you specified a suitable resolution? Make sure that the value for the "Resolution" setting in the scanner driver satisfies the requirement of the set original. Reference: Scanning an Image from a TWAINCompliant Application, Scanning an Image from a WIA-Compliant Application (Windows XP), Scanning an Image from the "Scanner and Camera Wizard" (Windows XP), CHECK3 Have you specified a suitable value for the "B/ W Threshold" setting? If you are scanning with a TWAIN-compliant application and are using "Mono 2 gradation (no Green)", "Mono 2 gradation (no Red)" or "Mono 2 gradation (no Blue)" mode, make sure that a suitable value is specified for the "B/W Threshold" setting. [. . . ]