User manual HASBRO XEVOZ IRON SPECTRE UNNATURAL

[. . . ] The following items are normally prohibited from copying by national law. Money Stamps Bonds Stocks Bank drafts Checks Passports Driver's licenses CONTENTS CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SOFTWARE LICENSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ENVIRONMENTAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the "Finish" screen appears, click the "Close" button. Note After the installation, a message prompting you to restart your computer may appear. In this case, click the "Yes" button to restart your computer. This completes the installation of the software. 52 SETTING UP BUTTON MANAGER Button Manager is a software program that works with the scanner driver to enable scanning from the machine. To scan using the machine, Button Manager must be linked with the scan menu on the machine. Follow the steps below to link Button Manager to scanner events. Windows XP/Vista 1 Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras". On Windows Vista, click the "Start" button, select "Control Panel" and click "Hardware and Sound", and then click "Scanners and Cameras". 2 3 4 Click the "HASBRO AL-XXXX" icon and select "Properties" from the "File" menu. On Windows Vista, select "Properties" from the "Organize" menu. In the "Properties" screen, click the "Events" tab. Select "SC1:" from the "Select an event" pull-down menu. 5 53 INSTALLING THE SOFTWARE 5 Select "Start this program" and then select "Sharp Button Manager O" from the pull-down menu. 6 7 Click the "Apply" button. Repeat Steps 4 through 6 to link Button Manager to "SC2:" through "SC6:". Select "SC2:" from the "Select an event" pull-down menu. Select "Start this program", select "Sharp Button Manager O" from the pull-down menu, and then click the "Apply" button. When the settings have been completed, click the "OK" button to close the screen. The scan settings for each of scan menu 1 through 6 can be changed with the setting window of Button Manager. For the factory default settings of the scan menu and the procedures for configuring Button Manager settings, see "Button Manager Settings" in the Online Manual. 54 INSTALLING THE SOFTWARE Windows 98/Me/2000 1 2 Click the "Start" button, select "Settings", and then click "Control Panel". Double-click the "Scanners and Cameras" icon. If the "Scanners and Cameras" icon does not appear in Windows Me, click "view all Control Panel options". Note 3 Select "HASBRO AL-XXXX" and click the "Properties" button. In Windows Me, right click "HASBRO AL-XXXX" and click "Properties" in the pop-up menu. 4 5 In the "Properties" screen, click the "Events" tab. Select "SC1:" from the "Scanner events" pull-down menu. 5 55 INSTALLING THE SOFTWARE 6 Select "Sharp Button Manager O" in "Send to this application". Note If other applications are shown, deselect the checkboxes for the other applications and leave only the Button Manager checkbox selected. 7 8 Click the "Apply" button. Repeat Steps 5 through 7 to link Button Manager to "SC2:" through "SC6:". Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp Button Manager O" in "Send to this application" and click the "Apply" button. When the settings have been completed, click the "OK" button to close the screen. (To change to a different mode, use the [MODE SELECT] key. ) 59 PRINTER/SCANNER FUNCTIONS Button Manager scan menu For information on Button Manager settings, see the Button Manager help file. The names in the Button Manager menu ("xxxx" in "SC1:xxxx", etc. ) can be changed. See the online manual. SCANNING FROM YOUR COMPUTER The machine supports the TWAIN standard, making it possible to scan from TWAINcompliant applications. The machine also supports WIA (Windows Image Acquisition), making it possible to scan from the "Scan and Camera Wizard" in Windows XP. For information on TWAIN and WIA settings, see the help file for the scanner driver or Windows Help. OPERATION IN COPY, PRINTER, AND SCANNER MODES Some operations cannot be performed simultaneously when the machine is being used in printer mode, copy mode, or scanner mode. Modes Copy key input During copying During printing Copying Yes No Yes*1 No Printing Yes No No Yes*2 Scanning from a computer Yes No Yes*3 No Scanning from the machine No No Yes*3 No Copy Printer Scanner During scan preview/ during scanning *1 During two-sided printing, the copy job begins after the print job finishes. Printing begins after scanning ends when connected by the LAN connector. *3 Scanning begins after printing ends when connected by the LAN connector and two-sided printing is taking place. 60 HOW TO USE THE ONLINE MANUAL The online manual provides detailed instructions for operating the unit as a printer and scanner. It also provides methods for dealing with printing or scanner problems. 1 2 3 Turn on your computer. Click the "start" button, click "My Computer" ( double-click the CD-ROM ( ) icon. ), and then · In Windows Vista, click the "Start" button, click "Computer", and then double-click the CD-ROM icon. [. . . ] To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in this mains lead may not correspond with coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug which is marked with the letter E, or by the safety earth symbol Å@, or coloured green or greenand-yellow. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! [. . . ]