User manual HASBRO XEVOZ ALPHA RANGER NEO SAPIENS

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B computing equipment. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undersized operation. [. . . ] Turning the power off Turning the power on The power LED will be lit green, and the screen will display an image. Turn the computer off OFF If the monitor is not going to be used for a long period of time, be sure to unplug it from the AC outlet. Notes: (when using an analog signal) - If using the monitor for the first time or after having changed the system settings during use, perform an automatic screen adjustment (p. - When connecting to a notebook, if the notebook computer's screen is set so that it is displaying at the same time, the MS-DOS screen may not be able to display properly. In this case, change the settings so that only the monitor is displaying. Connecting the monitor and turning the monitor on and off 16) For digital signal The monitor can generally be used without adjustment. 19) Note: - All adjustments will be saved even after turning the power off. Setting the lock) any attempted changes to adjusted values will be voided. continue to press the button until the message appears on the screen. When the menu is unlocked: [ADJUSTMENT LOCKED] will appear on the screen, and the lock will be set. When the menu is locked: [ADJUSTMENT UNLOCKED] will appear on the screen, and the lock will be removed. 15) If your system is not Windows, you can not use the Adjustment Pattern. Therefore display an image that makes the entire screen light and adjust it through checking visually its actual tone. (WHITE BALANCE MODE SELECT OSD Menu disappears) Notes: - The OSD Menu automatically disappears several seconds after the last command. Notes: - On settings other than [STD] not all graduations can be displayed. - Selecting USER will display the setting values for [R-CONTRAST], [G-CONTRAST] and [B-CONTRAST], in order to make fine adjustments. Button for yellow button for blue Notes: - Depending on the resolution of the input signal, even if menu options can be selected, the display may not change. - To choose a menu option: SELECT button - When adjustment complete: MENU button OSD H-POSITION (OSD horizontal position) The position of the OSD display can be moved to the buttons) left and right. ( OSD V-POSITION (OSD vertical position) The position of the OSD display can be moved up buttons) and down. ( SCALING (Level of scaling) Adjusts the image to optimum sharpness when buttons) Screen expansion is taken. Cabinet and control panel section Use a soft dry cloth to lightly wipe away any grime from the cabinet and control panel. If they are very dirty, apply neutral detergent to a dampened soft cloth, wring it out well and wipe away grime. [. . . ] Klicken Sie auf [Display a list of all the drivers in a specific location, so you can select the driver you want. Aktivieren Sie [Display a list of the known drivers for this device so that I can choose a specific driver], und klicken Sie auf [Next]. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. [. . . ]