User manual HASBRO WON OVER

[. . . ] Second priority jobs Print jobs, fax reception jobs. 1 Multi-Access Jobs processed simultaneously Scanner transmission jobs, memory transmission jobs (memory transmission jobs cannot be processed simultaneously with direct transmission jobs). 1st priority group Walkup jobs Copy jobs (including electronic sort functions) Fax scan jobs Direct transmission jobs Scan jobs Simultaneous processing Auto transmission jobs Memory transmission jobs Scanner transmission jobs 2nd priority group Auto print jobs Print jobs (including ROPM jobs) Fax reception jobs Transaction reports / activity reports (including auto printing) Notes G For example, if a fax is received during a copy job, the fax is not printed until the copy job has been completed. (If the fax is urgent, it is possible to interrupt copying and print the fax. ) G For example, if a scan or fax job is stored during a copy job and the machine runs out of paper, the stored scan or fax job is begun. However, this does not apply to copy jobs stored in two-sided printing and print priority mode. For details, refer to "Operation when errors occur". Functions and Multi-Access Functions and the operation panel This machine has four modes: copy mode, print mode, scan mode, and fax mode. [. . . ] The job is waiting or interrupted because another job is being printed. The job is interrupted because there are no staples. PRINT DISABLED Printing is not possible because there is no paper, no toner, or the drum life is over. NO TRAY A tray with the selected paper size has not been set. Paper tray and paper size The paper tray and paper size used for the job are displayed. However, if the job status is "NO TRAY", only the paper size appears. 6 Multi-Access Operation Procedures for Using Multi-Access 1) Interrupting a copy job 1 Press the INTERRUPT key during a copy job. G Copying stops temporarily and the job can be interrupted. For details, refer to the manual for copy mode. 2) Changing to a different print job during a copy job or auto print job The procedure for changing to a print job during a copying job is explained here. 1 2 3 4 Press the JOB STATUS key. ( page 5) Select "FAX/PRINT OUTPUT" or "JOB OUTPUT" with the keys and then press the OK key. ( page 6) Select a job whose status is "WAITING" with the then press the OK key. Select "YES" with the G The keys, and keys and then press the OK key. current job temporarily stops and the selected job is printed. 5 Press the START key to recommence copying. G The interrupted job recommences. Notes G You G You can change to fax print job or a print job during copying. can change to a fax print job during a print job, or change to a print job during a fax print job. G You cannot change to another job after interrupting the current job if the current job is a two-sided copy job, two-sided print job, or 2in1/4in1 copy job. 7 Multi-Access Operation Stopping a print job A print job is normally stopped by changing to print mode and then changing the job to "Offline". 1 2 3 Press the JOB STATUS key. ( page 5) Select "FAX/PRINT OUTPUT" or "JOB OUTPUT" with the keys and then press the OK key. However, the mode cannot be changed if the toner runs out during a copy job. In this case, you can press the CLEAR ALL key or CLEAR key to cancel the job, and then change the mode. The display reverts to the display of the currently selected mode when any key is pressed. Notes G When the error is cleared, the job that was in progress before the error occurred resumes. G If a scan job or fax scan job is in progress when the error occurs, the job continues. Out of paper A message appears in the display prompting you to add paper to the tray that ran out of paper. However, if you run out of paper during a copy job, the mode cannot be changed. In this case "Add paper" appears in the display, and the mode can be changed if you cancel the job by pressing the CLEAR ALL key or the CLEAR key. G Fax scan jobs and scan jobs are possible, and transmission is possible. Out of paper during a print job or fax print job G If paper runs out during a print job, a message appears in the display prompting you to add paper to the tray that is out of paper. You can also use the keys to select "BYPASS-TRAY" or "CLEAR DATA". G When the paper runs out during a print job or fax print job, the display will revert to the display of the currently selected mode when any key is pressed. [. . . ] G In fax mode or print mode, operation is the same as "Out of paper". Notes G When G If the error is cleared, the job that was in progress before the error occurred resumes. the exit tray becomes full during a print job, the job cannot be canceled. Remove the paper from the exit tray. Toner replenishment mode If toner replenishment mode activates during a copy job, fax job, or print job, "Toner replenishment in progress" will appear in the display. [. . . ]