User manual HASBRO WIPE-OFF OUTLINE MAP

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HASBRO WIPE-OFF OUTLINE MAP. We hope that this HASBRO WIPE-OFF OUTLINE MAP user guide will be useful to you.


HASBRO WIPE-OFF OUTLINE MAP : Download the complete user guide (57 Ko)

Manual abstract: user guide HASBRO WIPE-OFF OUTLINE MAP

Detailed instructions for use are in the User's Guide.

[. . . ] The socket-outlet shall be installed near the equipment and shall be easily accessible. T The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are applicable to the product. (This sentence is not applicable in any country where the above directives are not required. ) OUTLINE OF THIS MANUAL 1. GETTING STARTED This chapter describes the basic information on the use of this copier. 2 1 2 3 4 5 6 7 2. MAKING COPIES This chapter describes the basic copying functions such as normal copying, reduction or enlargement, and exposure adjustments. 3. SPECIAL FUNCTIONS This chapter describes special copying functions including various image editing functions. 4. COPIER TROUBLE? This chapter describes how to remove misfed paper and how to remedy minor problems. 5. GENERAL INFORMATION This chapter describes general information about the use of the copier and the loading of paper and toner. 6. OPTIONAL EQUIPMENT This chapter describes operating instructions for the Single Pass Feeder (AR-SP4), the Reversing Single Pass Feeder (AR-RP3), the Finisher (AR-FN5), the 500-Sheet Paper Feed Unit (AR-D11), and the 2 x 500-Sheet Paper Feed Unit (AR-D12). 7. KEY OPERATOR'S GUIDE This chapter contains information about all programs for use by the key operator. The programs allow the key operator to tailor many functions of this copier for specific modes of operation. 1 CONTENTS Page CHAPTER 1 GETTING STARTED INTRODUCTION . [. . . ] The package of HASBRO toner has the Genuine Supplies label. GENUINE SUPPLIES 1 Gently open the front cover. 2 GENERAL INFORMATION Push the toner cartridge lock release lever and pull the toner cartridge out. Remove the toner cartridge while supporting it with the left hand at the green label portion. Toner cartridge lock release lever Grip q For disposal of the old toner cartridge, contact your dealer. NOTE: After removing the toner cartridge, do not shake it or tap on it. Put the old cartridge immediately in the bag contained in the box of the new cartridge. 82 TONER CARTRIDGE REPLACEMENT 3 Remove the new toner cartridge from the bag. Grasp the cartridge on both sides and shake it horizontally approximately 20 times. After shaking the cartridge, remove the tape. NOTE: Grasp the grip when holding the cartridge. Be sure to only shake the cartridge before the tape is removed. Approx. 20 times Shutter Tape 4 Gently insert the toner cartridge along the guides until it clicks in place while pushing the lock release lever. NOTE: If dirt or dust is adhered to the toner cartridge, remove it before installing the cartridge. 5 Remove the tape from the shutter. Pull the shutter out of the toner cartridge as shown in the illustration. Discard the shutter. 5 GENERAL INFORMATION 6 Close the front cover. 83 CHECKING THE TONER QUANTITY AND TOTAL OUTPUT COUNT The approximate quantity of toner remaining and the total output count can be displayed by the procedure below. The total count value displayed is the output count in the copy, print, and fax modes including the output count by the self-print function of the printer and facsimile features. 1 Press and hold the COPY key during standby or warm-up. TOTAL OUTPUT 26, 788 TONER REMAINING(%) 0 25 50 75 100 q The toner quantity and the total output count will be displayed in the message display while the key is pressed. NOTE: An A3 or 11" x 17" sheet is counted as two sheets. A two-sided copy is also counted as two sheets. GENERAL INFORMATION 84 CLEANING THE PLATEN GLASS AND PLATEN COVER Proper care is essential for clean, sharp copies. Capacity Power supply Detectable original sizes Weight Up to 30 sheets provided the total aggregate thickness does not exceed 4 mm (5/32") Drawn from the copier A5, A4, A4R, B4, A3 (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17") SPF RSPF Approx. 5. 4 kg (11. 9 lbs. ) Dimensions 583 mm (W) x 435 mm (D) x 133 mm (H) (22-61/64" (W) x 17-1/8" (D) x 5-1/4" (H)) NOTE: As a part of our policy of continuous improvement, HASBRO reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units and there may be some deviations from these values in individual units. Acceptable originals Up to 30 originals ranging from A5 to A3 (5-1/2" x 8-1/2" to 11" x 17") and from 56 to 90 g/m2 (15 lbs. NOTES: q Be sure to remove any staples or paper clips from the originals. q Before placing curled or wavy originals into the document feeder tray, be sure to flatten them. q For best feeding of originals which have binding holes punched into them, insert them so that the holes are positioned to the right or along the original guides. See page 45. Unacceptable originals The following types of paper cannot be used as originals: q Special papers including transparency film, photographs, and tracing paper q Damaged or crumpled originals q Paper with multiple punched holes (paper with two or three holes can be used) q 5-1/2" x 8-1/2" size originals cannot be used in the 2-sided to 1-sided or 2-sided to 2-sided mode. OPTIONAL EQUIPMENT 94 SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3) Stream feeding mode If the stream feeding mode has been enabled using a key operator program, the message "Set originals for stream feeding. " will appear for approximately 5 seconds after feeding of all originals is completed. While this message is displayed, any new originals placed in the SPF or RSPF will be fed and copied automatically. 5KEY OPERATOR See page 128 for information on setting the stream feeding mode. Using the SPF or the RSPF 5KEY OPERATOR If SPF/RSPF is disabled using a key operator program, the SPF or the RSPF cannot be used. See page 135. One-sided copies from one-sided originals 1 2 Ensure that no original is left on the platen glass. Adjust the original guides to the size of the originals. 3 Set the originals face up in the document feeder tray. q The 6 OPTIONAL EQUIPMENT original size will be indicated in the display, and the paper tray with the corresponding paper size will be automatically selected. [. . . ] The classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats. : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m3) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m3) exposure group, but no pulmonary change was reported in the lowest (1mg/m3) exposure group, the most relevant level to potential human exposures. Chronic Effect 12. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HASBRO WIPE-OFF OUTLINE MAP




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HASBRO WIPE-OFF OUTLINE MAP will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.