User manual HASBRO WINNER CIRCLE NASCAR RC STOCK CAR RACER

[. . . ] 10 Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 tV menu 11 Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press oK or to enter Sound and select Sound mode Press to select one of the following settings: · personal · music · Speech 1 2 3 Press menu on the remote control and select tV Country. Follow the on-screen instructions to exit. 4 Follow the on-screen instructions to exit. 13 tV menu Step 3: automatic channel scan Your TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels. antenna mode Menu Picture Sound TV Features Parental Eco Scan single RF channel. (Digital Only) 0% RF Channel Signal Strength Signal Quality 21 0 Poor 1 Press menu on the remote control and select tV Channels note · You are prompted to enter current password to enter Channels if Channel Block /parental Guidance / input Block in the parental menu is not the default setting. 2 OK Scan EXIT Exit Select Channel Scan and press oK or and select atV only or atV and DtV to start channel installation. When complete, follow the on-screen instructions to exit. Cable mode Menu Picture Sound TV Features Parental Eco 3 Scan single RF channel. (Digital Only) 0% Frequency (KHz) Modulation Auto Symbol Rate (Ksym/s) Signal Strength EXIT Exit 0 474000 6875 E update Scan update Scan has similar function with Channel Scan. The difference is you could update channel list without erasing the original information. note · This function is for Antenna mode only. OK Scan 1 Press menu on the remote control and select tV Channels. 3 note · You are prompted to enter current password to enter Channels if Channel Block /parental Guidance / input Block in the parental menu is not the default setting. <antenna mode> Highlight the rF Channel box, and press to select a channel number you prefer to scan. <Cable mode> Configure the Frequency, modulation, and Symbol rate box to scan. 2 3 Press <> to select update Scan and press oK or to start channel update. When complete, follow the on-screen instructions to exit. 4 5 6 Press oK to start scanning. When the scan is completed, the result of signal strength and signal quality appear on the screen. · For 4:3 PC input signal, picture format 4:3 and Wide screen are available. · For other input signals, only Wide screen is available. time Set the current time and the sleep timer. auto The Automatic format for DTV transports streams with AFD information, while for ATV and SCART should be with WSS information. E Change the time zone 1 2 3 4 Press menu on your remote control and select Features > time. Follow the on-screen instructions to exit. normal (not for HD) Displays the classic 4:3 format. 17 tV menu E Set the clock E automatically switch the tV to standby (Sleep timer) Sleep timer switches the TV to standby after a defined period of time. 1 2 3 Press menu on the remote control and select Features time. Press <> to select time and press oK or to enter. 1 2 3 4 Press menu on the remote control and select Features time. Press <> to select Sleep timer Press to select the period of time before TV enters to standby. Follow the on-screen instructions to exit. Menu Picture Sound TV Features Parental Eco Auto Synchronization Date Time Timer Off Time Off 2009/01/01 16: 52: 38 Off 00: 00: 00 5 note · When you press any button on the remote control with less than three minutes left in the countdown, Sleep timer will be automatically canceled. Select EXIT Back SCart You can set the specific type of signal going into SCART terminal. Check the signal output type of the DVD or other equipment connected to the SCART teminal of the TV, referring to manufacturer's instruction of those devices. note 4 Select auto Synchronization and press to select: · on: Sets the clock automatically the same with the digital signal time. · off: Press <> to set your system Date or time manually by using the digit buttons on your remote control. 5 When the clock setting is completed, follow the on-screen instructions to exit. · This option is available only when the input source is SCART. E automatically switch the tV off (off time) Off time switches the TV to standby at a specified time. With digital broadcasts, you have the additional option of selecting a preferred subtitle language. · Before using off time function, you have to set the time on your TV correctly. (See page 17 "Set the clock") 1 2 3 4 Press menu on the remote control and select Features time. [. . . ] · The "HD TV 1080p" Logo is a trademark of DIGITALEUROPE. · The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project. · Dolby and the double-D symbol are trademarks of Dolby Laboratories. · DivX® is a registered trademark of DivX, Inc. , and is used under license. [. . . ]