User manual HASBRO WILLOW

[. . . ] To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing the plug cover make sure that: If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. [. . . ] Press a/b to select "HDMI Setup", and then press OK. "HDMI Setup" is displayed only when "EXT6" or "EXT7" is selected from the INPUT SOURCE menu. MENU [Option . . . HDMI Setup] 2 3 4 NOTE If no (colour) image displays, try to change the other signal type. Check the operation manual of the external equipment for the signal type. TV, EXT3, EXT4, EXT5, EXT6 and EXT7 are not displayed in Input Select. If both CVBS and RGB signals are input to EXT 1 or EXT 2 using a SCART cable, the TV may output an RGB signal even though you have designated CVBS for the respective terminal. This happens due to the setting of your external equipment. Colour System TV/AV only Option Audio Only DNR HDMI Setup [Off] Menu Operation: A (page 12) You can change the colour system to one that is compatible with the image on the screen. (AUTO, PAL, SECAM, NTSC3. 58, NTSC4. 43, PAL-60) NOTE Factory preset value is "AUTO". If "AUTO" is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e. g. "NTSC3. 58", "NTSC4. 43" and "PAL-60" cannot be selected in TV tuner mode. 5 6 Press a/b to select the desired item, and then press OK. Press a/b/c/d to select the desired setting, and then press OK. Selectable items RGB/YCbCr 4:4:4/ YCbCr 4:2:2 ITU601/ITU709 Description Select the video signal type from the HDMI terminal. News, weather and sports information, stock exchange prices and programme previews are among the many services available. 4 Turning on and off Teletext 1 2 3 Select a TV channel or external input source providing the Teletext programme. Press m again to display the Teletext on the right screen and normal image on the left screen. Each time you press m, the screen switches as shown below. DATA* TELETEXT NOTE The time display cannot be stored once the power is turned off. If acquired successfully, the time information will appear in the upper-right corner of the screen by pressing MENU. Button functions Buttons P (r/s) Colour (Red/ Green/Yellow/ Blue) Description Increase or decrease the page number. Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (Red/Green/Yellow/Blue) on the remote control unit. Directly select any page from 100 to 899 by using 0 9. 09 Reveal or hide hidden information such as an k (Reveal hidden Teletext) answer to a quiz. TELETEXT 3 (Freeze/ Hold) [ (Subtitle for Teletext) Stop updating Teletext pages automatically or release the hold mode. Subtitle will not be displayed when the service does not contain the subtitle information. These two buttons are shown on the screen by the signs l and k. * May appear in DTV input mode. If you select a programme with no Teletext signal, "No Teletext available. " displays. The same message displays during other modes if no Teletext signal is available. (See page 19. ) 1 (Subpage) 21 DTV menu operations DTV menu operation buttons Use the following buttons on the remote control unit to operate the DTV Menu. DTV On-Screen Display Example DTV MENU / Language 1 2 3 4 5 6 7 Select DTV MENU OK END 1 Language To customise the language preference for audio and MHEG5 application. 2 [: m: : Press to display the subtitle selection screen. [. . . ] * NP NP NP NP NP NP NP NP NP NP NP NP NP MU MU MU MU ACD ACD ACD ACD ACHA VMD VMD VMD VMD VMD VMD VMD LM VO VO DCPG DCPG LM? NOTE If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS. Rating table for Child Lock Broadcasted rating Useradjusted rating AGE 4 5 -- 6 -- 7 -- 8 -- 9 -- -- 10 -- -- 11 -- -- Parental -- -- 12 -- -- 13 -- -- 14 -- -- 15 -- -- 16 -- -- X-rated -- -- -- 17 -- -- 18 -- -- Universal Parental X-rated Broadcasted rating Useradjusted rating Universal -- Universal Parental X-rated 34 Appendix Specifications Item LCD panel Resolution Video Colour System TV Function TV-Standard Receiving Channel Analogue Digital VHF/UHF CATV 37o LCD COLOUR TV, Model: LC-37D44E, WILLOW 37o Advanced Super View & BLACK TFT LCD 1, 049, 088 pixels (1, 366 g 768) PAL/SECAM/NTSC 3. 58/NTSC 4. 43/PAL 60 CCIR (B/G, I, D/K, L, L') DVB-T (2K/8K OFDM) E2E69ch, F2F10ch, I21I69ch, IR AIR Jch, (Digital: E5E69ch) Hyper-band, S1S41ch Auto Preset 999 ch: non-Nordic / 9999 ch: Nordic (ATV: 99 ch), Auto Label, Auto Sort NICAM/A2 450 cd/m2 (in Dynamic Mode) 60, 000 hours (in Standard Mode) H : 176 V : 176 10W g 2 (100 mm g 35 mm) g 2 Antenna RS-232C EXT 1 EXT 2 EXT 3 EXT 4 EXT 5 EXT 6 EXT 7 C. (Common Interface) OUTPUT Headphones Power Requirement Power Consumption Weight Operating temperature UHF/VHF 75q Din type (Analogue & Digital) 9 pin mini D-sub SCART (AV input, Y/C input, RGB input, TV output) SCART (AV input/output, Y/C input, RGB input, AV Link) S-VIDEO (Y/C input), RCA pin (AV input) 3. 5 mm jack (Audio input), 15 pin mini D-sub (PC) Audio in, Component in HDMI, 3. 5 mm jack (Audio input) HDMI EN50221, R206001 RCA pin (Audio) 3. 5 mm jack (Audio output) AC 220240 V, 50 Hz 146 W (0. 9 W Standby) (Method IEC60107) 14. 5 kg (Display only), 17. 0 kg (Display with stand) 0C to k40C TV-Tuning System STEREO/BILINGUAL Brightness Backlight life Viewing angles Audio amplifier Speaker Terminals As a part of policy of continuous improvement, HASBRO reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. [. . . ]