User manual HASBRO WHO FRAMED ROGER RABBIT

[. . . ] The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The enclosed AC cord must be used with the device. The cable is provided to ensure that the device complies with FCC Rules. ONLY 1 ESPAOL FRANAIS ENGLISH IMPORTANT INFORMATION (Continued) CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. [. . . ] . Using FLASHBACK Press FLASHBACK to switch the currently tuned channel to the previously tuned channel. Press FLASHBACK again to switch back to the currently tuned channel. 18 Basic Operation (Continued) Selecting Menu Items The menus can be used to adjust the various settings of your LCD TV set. See the next page for each Menu screen. A The items displayed differ depending on the setting conditions. Settings most recently adjusted will be saved in memory. Using the remote control Using the control panel of the main unit Control panel of the main unit INPUT VOL ()/(+) MENU (Volume ) CH ( )/( ) (Channel) 1 2 3 1 Press MENU on the remote control to display the Menu Screen. Press '/" to select the desired item, and press \/| to adjust the selected item. For "AV MODE", "OPC", "ADVANCED" and "RESET", press ENTER to display the setting screen. PICTURE S AUDIO SETUP OPTION AV MODE [DYNAMIC] OPC [OFF] BACKLIGHT [ BRIGHT ] CONTRAST [ 45] 0 ] BRIGHTNESS[ COLOR [+ 5] 0] TINT [ HASBRONESS [ 0 ] ADVANCED RESET Press MENU on the main unit to display the Menu Screen. Press CH ( )/( ) to select the desired item and press VOL ()/(+) to adjust the selected item. For "AV MODE", "OPC", "ADVANCED" and "RESET", press INPUT to display the setting screen. PICTURE S AUDIO SETUP OPTION AV MODE [DYNAMIC] OPC [OFF] BACKLIGHT [ BRIGHT ] CONTRAST [ 45] 0 ] BRIGHTNESS[ COLOR [+ 5] 0] TINT [ HASBRONESS [ 0 ] ADVANCED RESET 2 3 + + + + + + 4 Press MENU RETURN to return to the previous screen, or press MENU to exit. 4 Press MENU to exit. 19 Basic Operation (Continued) Menu setting screens 0 For details on setting each menu item, refer to the page number indicated below. A The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual appearance. Depending on the setting condition, such as an input mode, it may not be possible to adjust or set some items. In such cases, a message will be displayed on the menu setting screen. PICTURE MENU[ PICTURE] PICTURE S AUDIO SETUP OPTION AV MODE [DYNAMIC] OPC [OFF] BACKLIGHT [ BRIGHT ] CONTRAST [ 45] BRIGHTNESS[ 0 ] COLOR [+ 5] TINT [ 0] HASBRONESS [ 0 ] ADVANCED RESET + + + Page AV MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 OPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When set to "AUTO", make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. A Select "ADVANCED", and press ENTER to set "COLOR TEMP. ". When resetting all adjustment items (except for the items on the "AV MODE", "OPC" and "ADVANCED" menus) to factory preset values, perform the following procedures. 1 Press '/" to select "RESET" in the PICTURE screen, and press ENTER. 2 Press '/" to select "YES", and press ENTER. 22 Basic Adjustment Settings (Continued) COLOR TEMPERATURE You can adjust the color temperature to give a better white balance. AUDIO Adjustments You can adjust the sound quality to your preference with the following settings. 1 2 3 4 Press MENU to display the Menu screen. Press '/" to select "COLOR TEMP. ", and press ENTER. C R G B R O E R L E L D E U S OR EN E ET TEMP. 0] [ 0] [ [ 0] USER HIGH MIDDLE LOW 1 2 3 Press MENU to display the Menu screen. Press '/" to select a specific adjustment item. AUDIO TRE BAS BAL RES SETUP OPTION BLE [ 0 ] 0 ] S [ ANCE[ 0 ]L ET + + R 4 5 Press \/| to adjust the item to your desired position. Press MENU to exit. \ button For weaker treble For weaker bass Decrease audio from the right speaker | button For stronger treble For stronger bass Decrease audio from the left speaker Selected item 5 6 Press '/" to select the desired item, and press ENTER. Press MENU to exit. Description Can set your desired color* White with Bluish tone White with Reddish tone TREBLE BASS BALANCE Selected item USER HIGH MIDDLE LOW A The items on the AUDIO menu cannot be set when "INPUT3 SELECT" is set to "OUT VAO". When resetting all adjustment items to factory preset values, perform the following procedures. | button *When you select "USER", the following items are adjustable. Selected item RED GREEN BLUE \ button Weaker red Weaker green Weaker blue Stronger red Stronger green Stronger blue A When resetting the items in the "USER" setting to factory preset values, perform the following procedures. [. . . ] The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. [. . . ]