User manual HASBRO WCW NITRO HOLLYWOOD HOGAN

[. . . ] TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO DRIPPING OR SPLASHING, NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS. Laser Diode Properties Material: GaAs Wave length: DVD: 655 nm CD: 790 nm Emission Duration: Continuous Laser output: Max. 0. 8 mW Power Cord Protection To avoid any malfunctions of the VCR/DVD, and to protect against electric shock, fire or personal injury, please observe the following. · Hold the plug firmly when connecting or disconnecting the AC power cord. [. . . ] 2 Press the numerical buttons to set the PlusCode number of the programme you want to record. · Press s to go back one digit from current digit while you set the PlusCode number. · FOR DAILY RECORDING : To record a TV programme at the same time on the same channel, from Monday to Friday. Press DAILY/WEEKLY repeatedly to select DAILY (MOFR), then press the VIDEO Plus+ button. · FOR EVERYDAY RECORDING : To record a TV programme at the same time on the same channel every day. Press DAILY/WEEKLY repeatedly to select DAILY (MOSU), then press the VIDEO Plus+ button. · FOR WEEKLY RECORDING : To record a TV programme at the same time on the same channel every week. Press DAILY/WEEKLY repeatedly to select WEEKLY, then press the VIDEO Plus+ button. NOTES: · If the PlusCode number is not available, it will be cleared automatically when you press the VIDEO Plus+ button. Enter the correct PlusCode number and press the VIDEO Plus+ button again. · If the PlusCode number flashes when you press the VIDEO Plus+ button, this means that the PlusCode number you entered was incorrect or the timer recording you just programmed and another timer recording overlap. The VCR/DVD begins rewinding or fast forwarding to the specified point. NOTES: · Time Search can be set up to 9 hours 59 minutes (9:59). · Operations must be followed up within 30 seconds, from steps 2 to 3 . 4 Select "AV2" or "AV3" position on the recording VCR/DVD. 7 To stop recording, press STOP/EJECT on the recording VCR/DVD, then stop playback of the tape in the playing VCR. NOTES: · For best results during dubbing, use the VCR/DVD's front panel controls whenever possible. · If video or colour fades in and out, you may be copying a copy guarded video tape. · Unauthorised recording of copyrighted materials may infringe on the rights of copyright owners, violate copyright laws and may not record clearly. To monitor the recording Turn on the TV and select the video channel on the TV. Recording from DVD to VCR 1 To activate DVD function, press DVD. 2 Insert a non-copyright-protection DVD, then press PAUSE at the point where you want to start recording. 3 Press VCR, then insert a tape with its erase-prevention tab in place. [. . . ] ­Gently push the centre of the tape when putting into the cassette compartment. ­Make sure the power plug is completely connected to a power outlet. Distorted picture Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output No DTS audio at analogue output. Picture freezes momentarily during playback Disc cannot be played No return to start-up screen when disc is removed The VCR/DVD does not respond to the remote control Buttons do not work or VCR/DVD stops responding VCR/DVD does not respond to some operating commands during playback. VCR/DVD cannot not read CDs/DVDs The VCR does not record a TV programme. [. . . ]