User manual HASBRO WATERWORKS SPANISH 1972

[. . . ] Z Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Notes: z Parts and equipment mentioned in this operation manual other than those detailed above are not included. Z Do not wear your headphones when you are crossing streets or near traffic. Z Places exposed to direct sunlight for many hours (especially in cars with the doors and windows closed) or near heaters. [. . . ] Z Track numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise. Z The track numbers on the playback side may not match the track numbers recorded on the MiniDisc. The track number will be increased by one each time you interrupt recording. Adjust the recording level so that the maximum sound volume from the source makes the reading swing between -4 dB and 0 dB. The unit automatically pauses when the microphone does not pick up any sound for 3 seconds or more. (Pause function does not work for approximately 10 seconds after a recording starts. ) When the microphone picks up sound again, recording starts automatically. Notes: z Whilst making a mic recording, do not connect anything to the OPTICAL/LINE IN socket on the portable MD. - When a plug-in-power type microphone is plugged in , the portable MD will provide power for the microphone's operation. - If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction. Z If the unit starts recording too often from low unwanted noises, set the microphone input to "MIC SYNC L". During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. The digital recording level you set will be kept even after cancelling recording. The first 3 characters in the group of the selected characters will be displayed for about 1 second. Position where the next letter will be entered To enter more letters, repeat steps 3 - 5. "TOC" will not disappear until the recorded contents have been updated. Press the VOL+ or VOL- button to move the cursor to the character you want to erase, and then press the BASS button. , , To enter a space Note: One disc name and up to 255 track names can be created per disc (a maximum of 100 characters for the disc and each track name and a total of 1, 700 characters can be entered. However, if any tracks are recorded in the 2 times or 4 times long recording mode, the number of characters to be entered is decreased, since the information of the recording mode is stored by the track). When there are 2 MiniDiscs on which the same tracks are recorded, you can transfer the character information (disc and track names) of the Master MiniDisc to another MiniDisc (for stamping). a recordable MiniDisc that contains tracks and character information. [. . . ] When the unit is excessively dirty, use a soft cloth dampened in water (external surfaces only). When the unit has condensation inside, the disc signals cannot be read, and the unit may not function properly. Z When the unit is placed in a room where there is excessive steam or moisture. Caution: z Do not use chemicals for cleaning (petrol, paint thinner, etc. [. . . ]