User manual HASBRO WACKY WIGWAM

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HASBRO WACKY WIGWAM. We hope that this HASBRO WACKY WIGWAM user guide will be useful to you.


HASBRO WACKY WIGWAM : Download the complete user guide (124 Ko)

Manual abstract: user guide HASBRO WACKY WIGWAM

Detailed instructions for use are in the User's Guide.

[. . . ] Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. · The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. [. . . ] Mode1: · If there is no signal input for 8 minutes, the TV enters the standby mode. · Even if you start using the PC and the signal inputs again, the TV stays in standby mode. · The TV turns on again by pressing a on the TV or B on the remote control unit. (See page 7. ) Mode2: · If there is no signal input for 8 seconds, the TV enters the standby mode. · When you start using the PC and the signal inputs again, the TV turns on. · The TV turns on again by pressing a on the TV or B on the remote control unit. (See page 7. ) Off: 4 Press a/b to select "Auto Search", "Manual Adjust", "Sort" or "Erase Programme", and then press OK. Auto Search Manual Adjust Sort Erase Programme No Yes Auto Search You can automatically search for and download TV channels by performing the procedure below. This is the same function as from programme auto search to preset download in Auto Installation. Setup menu MENU [Setup] Option Setup Auto Installation Programme Setup Child Lock Position WSS 4:3 Mode Language [On] [Panorama] [English] 1 2 Repeat steps 1 to 4 in Programme Setup. Press c/d to select "Yes", and then press OK. 1 2 3 4 Programme auto search Auto labelling Auto sorting Preset download 14 Menu operations 2 Manual Adjust You can set some channel items manually. MENU [Setup . . . Programme Setup] Press a/b/c/d to select each character of the new name for the channel, and then press OK. Repeat step 2 above until the name is fully spelt out. · The name can be 5 characters or less. Repeat step 5 above until the name is fully spelt out, and then press OK. · The name can be 6 characters or less. · If a label name is less than 6 characters, select "END", then press OK. New PIN ­­­­ Reconfirm ­­­­ NOTE · You cannot change the label if the input source is TV. 4 5 Enter the 4-digit number as a PIN using 0 ­ 9. Enter the same 4-digit number as in step 4 to confirm. · "The system PIN has been changed successfully" displays. Fine Sync. Menu Operation: C (Page 11) PC only NOTE · To view a locked channel (Lock setting in Programme Setup "Manual Adjust" is set to "On"), you must enter a PIN. (See page 15. ) When you select a locked channel, a PIN prompt message pops up. Press OK to display the PIN input window. Ordinarily, the TV automatically adjusts image positions coming from PC (Auto Sync. In some cases, however, manual adjustment is needed to optimise the image. Phase: Adjusts when characters have low contrast or when the image flickers. Resetting the PIN Allow you to reset your PIN to the factory preset "1234". 1 2 3 4 Repeat steps 1 to 3 in Changing the PIN. NOTE · If you need to adjust the image position, adjust the position using your PC. NOTE · As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach. · See page 21 for resetting the current PIN to the factory preset "1234" if you lose or forget your PIN. 16 Menu operations Position Menu Operation: C (Page 11) TV/AV only Language Menu Operation: A (page 11) You can select a language from the Setup menu. (Dutch, English, Finnish, French, German, Greek, Italian, Polish, Portuguese, Russian, Spanish, Swedish, Turkish) For adjusting a picture's horizontal and vertical position. V-Pos. : Centres the image by moving it up or down. Option menu MENU [Option] Option Audio Only DNR [Off] [CVBS] [AUTO] NOTE · Adjustments are stored separately according to input source. [. . . ] PHSE? Command format Eight ASCII codes e CR WIDE MODE WI WI WI WI WI WI WI WI WI WI DE0 DE1 DE2 DE3 DE4 DE5 DE6 DE9 DE? C1 C2 C3 C4 P1 P2 P3 Command 4-digits P4 Return code Parameter 4-digits Command 4-digits: Command. Parameter 4-digits: Parameter 0 ­ 9, g, blank, ? DE10 Parameter Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that four values are input for the parameter. ) When the input parameter is not within an adjustable range, "ERR" returns. (Refer to "Response code format". ) MUTE MUTE0 MUTE1 MUTE2 MUTE? SURROUND ACDV0 ACDV1 ACDV2 ACDV? 0 0 0 0 9 ­ 1 3 0 0 0 0 0 5 5 AUDIO CHANGE SLEEP TIMER ACHA_ OFTM0 OFTM1 OFTM2 OFTM3 OFTM4 OFTM5 OFTM? When "?" is input for some commands, the present setting value responds. ? ? ? ? ? Response code format TEXT TEXT0 TEXT1 TEXT ? Normal response O K Return code (0DH) DCPG* DCPG? Problem response (communication error or incorrect command) NOTE · If an underbar (_) appears in the parameter column, enter a space. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HASBRO WACKY WIGWAM




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HASBRO WACKY WIGWAM will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.