User manual HASBRO U.S. GAME OF GEOGRAPHY

[. . . ]  Inside the pack containing this manual, you will also find the guarantee and all the details necessary for installation.  If the appliance is levelled correctly, it will be more stable and much less likely to cause vibrations and noise while it is operating, particularly during the spin cycle.  If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity and water supplies Connecting the water inlet hose  Before connecting the inlet hose to the water supply, run the water until it is perfectly clear. [. . . ] Refer to the paragraph "Traditional” mode for implementing the traditional operation mode. Use the relevant buttons on the control panel: Modify the temperature and/or spin speed. The machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most recently-used settings if they are compatible with the selected cycle. The temperature can be decreased by pressing the button, until the cold wash “OFF” setting is reached. The spin speed may be progressively reduced by pressing the button, until it is completely excluded “OFF”.  Exception: if the “Cottons” programme is selected, the temperature can be increased up to a value of 90°C. To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. During the setting procedure, the delay period and the text "Starts in:" will be displayed, along with the flashing symbol. After the symbol will remain delayed start has been set, the fixed on the display, which will also indicate the duration of the selected cycle with the text "Ends in:" and the cycle duration. Press the DELAY TIMER button just once to display the delay time set previously. After the countdown has begun, the display will show the text "Starts in:" and the delay period. 3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C. Wash options This option offers a high-performance wash due to the greater quantity of water used in the initial phase of the cycle, and due to the increased wash cycle duration, is particularly useful for the removal of stubborn stains. 1 When dosing the bleach, be 2 careful not to exceed the "max" level (see figure). To bleach laundry without carrying out a full wash cycle, pour the bleach into the compartment 3, select the "Rinse" cycle and . Activate the "Super Wash" option  It cannot be used in conjunction with , , , , , , , . To end the cycle press the START/PAUSE button or the “Easy Iron” button. For the Silk wash cycle, the machine will end the cycle while the laundry is soaking and the “Easy Iron” indicator light will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the “Easy Iron” button. If you select this option, the wash cycle duration will be reduced by 30%-50%, depending on the selected cycle, thereby guaranteeing simultaneous water and energy saving. Time Saver By selecting this option, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine drum will rotate slowly; the “Easy Iron” and START/ Easy Iron By selecting this option, the efficiency of the rinse is increased and optimal residual detergent removal is guaranteed. [. . . ] • The wash cycle does not include draining: Some wash cycles require the drain phase to be started manually (see “Wash cycles and options”). • The “Easy iron” option is enabled: to complete the wash cycle, press the START/PAUSE button (“Wash cycles and options”). • • • • The The The The drum was not unlocked correctly during installation (see “Installation”). • The detergent dispenser is blocked (to clean it, see “Care and maintenance”). [. . . ]