User manual HASBRO TRIVIAL PURSUIT DISNEY FAMILY EDITION MASTER GAME

[. . . ]  If positioned on a fitted carpet or a rug, adjust the feet in such a way as to allow room for air to circulate and provide ventilation beneath the washing machine.  Please read this instruction manual carefully it Connecting the cold water and electricity supplies Connecting the water inlet hose  You will find the guarantee and other details relating to Unpacking and levelling Unpacking  Before connecting the inlet hose to the cold water supply, allow the water to flow from the tap until it runs clear. Connect the inlet hose to the machine, by screwing it into the cold water inlet on the upper right hand side of the back of the machine (see figure). Once the washing machine has been removed from the packaging, check that it has not been damaged during transportation. [. . . ] By pressing the rature can be progressively reduced or even set to cold wash . By pressing the button, the spin speed can be progressively reduced or even . If the buttons are pressed eliminated altogether again the maximum values are restored. To set the "delayed start" option for the program you have selected, press the button until the indicator light for the desired delay time is illuminated. : once the START/PAUSE button is pressed the "delayed start" indicator light will flash (the time delay value may only be changed by decreasing the time). Press the OPTION buttons to personalise the wash cycle according to your own requirements. • Press the button to activate the option; the corresponding indicator light will illuminate. • Press the button again to deactivate the option; the indicator light will switch off.  If the selected option is not compatible with the set programme, the indicator light will flash and the option will not be activated.  If the selected option is not compatible with another previously selected option, the indicator light corresponding to the first option will flash and only the second option will be activated (the corresponding indicator light will remain lit in a fixed manner). The corresponding indicator light remains lit in a fixed manner and the porthole door locks (the DOOR LOCK indicator light illuminates). • Divide the laundry according to type of material (the symbol on the garment label) and colour, making sure that whites are separated from coloured garments. • Do not exceed the values indicated in the “Table of Programmes”, which refer to the weight of the laundry items when they are dry. Quilts: to wash quilts with a synthetic outer layer, use the bag provided and set the programme to "Duvets". Stubborn stains: stubborn stains should be treated with solid soap before the garment is washed (use the Cotton programme with pre-wash phase). 1 1 1 1 1 1 1 sheet pillowcase tablecloth bathrobe towel pair of jeans shirt 400 150 400 900 150 400 150 - 500 g 200 g 500 g 1200 g 250 g 500 g 200 g Load-balancing system Before every spin cycle, to avoid excessive vibrations and to distribute the load in a uniform manner, the drum rotates continuously at a speed which is slightly faster than the normal washing speed. If, after several attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set frequency. If the load is excessively unbalanced, the washing machine continues at distribution speed only instead of the full spin speed. In order to achieve better load distribution and balance, we recommend that large and small garments are mixed when placing the laundry in the machine. Washing advice Shirts: use a suitable programme to wash shirts made from different fabrics and in different colours. 20 Precautions and tips  This machine was designed and manufactured in compliance with cuurent international safety standards. The following advice is provided for safety reasons and should be read carefully. [. . . ] ) fall into the pre-chamber that protects the pump (the pump is located in the lower part of this prechamber).  Make sure that the wash cycle has finished and remove the plug from the socket. 22 Troubleshooting From time to time your machine may not operate as it should. Before calling for Assistance (see “Assistance”), make sure that the problem cannot be resolved easily using the following list. [. . . ]