User manual HASBRO TIGER

[. . . ] € never pull the supply cord, or the appliance itself, to disconnect the plug from the electrical socket. ) • never let children or persons unfamiliar with the appliance use it without appropriate supervision. 13 Before doing any cleaning or maintenance work on the appliance, disconnect it from the supply mains, either by removing the plug from the socket, or by turning off the power at the mains. 14 If the glass surface of the cooktop cracks or breaks, disconnect the appliance immediately from the power supply. [. . . ] 17 Keep in mind that the cooking area remains hot for at least a half an hour after the appliance has been turned off. Make sure that you do not inadvertently place containers or objects on the cooking area while it is still hot. 18 Do not turn the heating elements on if there are plastic objects or aluminium foil on the cooktop. 20 When using small electrical appliances near the cooktop, make sure that the supply chord does not come into contact with those parts of the appliances which are hot. 21 Make sure that the handles on pots and pans are turned inward to prevent bumping them accidentally. 22 Never leave a cooking element on unless element is placed on the element because the cookware will become very hot in a short period of time and this may damage the heating elements. We recommend that these residues be removed with a non-abrasive cleaning product before the appliance is used. During the first few hours of use, you may detect the odour of rubber. 7 Installation These instructions are intended for the qualified technician installing the appliance in order to insure that the installation, adjustments and maintenance procedures are performed correctly and comply with the regulations currently in effect. Important: the cooktop must be disconnected from the power supply before making any adjustments or performing any maintenance, etc. Installing built-in cooktops The cooktops have a type X protection rating against overheating in compliance with regulation CEI 335-2-6. The multipolar switch must have a minimum of 3 mm of space between the contacts, be sized to the load, and comply with current regulations (the switch must not be able to disconnect the earth conductor). The supply cord must be positioned so that no part of it reaches a temperature of 50 °C higher than room temperature. Before making the connection, make sure that: the circuit breaker and the residential wiring can support the appliance load (see rating plate); the mains system is properly earthed in compliance with current regulations and provisions; there is easy access to the socket or the multipolar switch after the appliance is installed. Electrical connection Power supply - Voltage Fuses - Section Blue Brown Connect the two black live wires L1 and L2 Neutral Live Earth N L Single-phase wiring Maximum Electrical Input: KM 6000 Q KM 6001 H TIGER 6200W 6400W 6500W L NOIR L1 NOIR L1 L2 NOIR L1 L2 NOIR L1 N BR BL L2 BR BL N BR BL L3 BR BL AT-FR-BE-DE-GP-ES-IE-IL-IS-ITLU-RE-FI-GR-PT-SE-MA-NZ GB-DK-NL 230 V - 1 + N ~ 50 Hz Fuse 20 A* FR - BE - NO 230 V - 2 ~ 50 Hz Fuse 20 A* AT-FR-BE-CH-DE-ES-IL-IS-IT-LU PT-SE-MA-NZ-DK-NL 400 V - 2 + N ~ 50 Hz Fuse 16 A* FR - BE -NO 230 V - 3 ~ 50 Hz Fuse 20 A* NL 230 V - 2 +2N ~ 50 Hz Fuse 16 A* CY-MT-AU-KW 240 V - 1 + N ~ 50 Hz Fuse 20 A* This appliance conforms with the following European Economic Community directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications; - 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications; - 93/68/EEC of 22/07/93 and subsequent modifications L2 N 1 N 2 NOIR BR BL L NOIR N BR BL N:Black, BR:Brown, BL:Blue * Application of the simultaneity coefficient in compliance with standard EN 335-2-6 Y-type connection in compliance with standard EN 335-2-6. Attention: If the cooktop is installed above a built-in oven, the electrical connection for the cooktop must be independent of that for the oven, both for safety reasons and to facilitate the removal of the oven for maintenance, repair, etc. 9 Description of the cooktop A A 0 12 1 11 10 9 4 3 2 0 1 4 3 2 0 1 4 3 2 The different functions of the hob Description of the heating elements The heating elements are circular in shape and turn red in colour only 20-30 seconds after they have been turned on. The cooktop utilises heating elements which are made up of two halogen lamps and a circular heating element. This combination provides ideal heat distribution across the entire surface of the cooking area without compromising the advantages of the halogen lamps. The main characteristic of halogen lamps is that they produce an instantaneous emission of a large quantity of light and heat, which means: • a rapid source of heat similar to that provided by gas burners; • an equally rapid elimination of the heat source. Halogen lamps are extremely easy to use and their operation is similar to that of other heating elements. Table 1 The control knobs Each cooking area is equipped with a control knob to regulate the temperature at any time from a minimum of 1 to a maximum of 12. [. . . ] Instructions on how to use the ceramic glass cooktop To obtain the best results with the ceramic glass cooktop, several fundamental rules should be followed while cooking or preparing food. € Use cookware with a flat bottom to make certain that the pot sets properly on the cooking area. Setting 0 1 2 3 4 5 6 7 8 9 10 11 12 Automatic plate Off For melting butter, chocolate For heating liquids • Use cookware with a diameter large enough to completely cover the cooking plate in order to utilise all of the heat produced by the heating element. For creams and sauces For cooking at boiling temperature • For roasts • For big boiled dishes For frjing • Make sure that the bottom of the cookware is always clean and dry to provide good contact between the cooking surface and the cookware. [. . . ]