User manual HASBRO TABOO

[. . . ] Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below). Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram). Loosen the cable clamp screw and remove it, using a screwdriver as a lever (see figure). [. . . ] If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. 65 voltage: 220-240V ~ 50/60 Hz or 50Hz (see data plate) maximum power absorbed 2250W Directive 2002/40/EC on the label of electric ovens. Standard EN 50304 ENERGY LABEL Declared energy for Natural convection Class – heating mode: = Convection mode This appliance conforms to the following European Economic Community directives: - 2006/95/EEC of 12/12/06 (Low Voltage) and subsequent amendments; - 2004/108/EEC of 15/12/04 (Electromagnetic Compatibility) and subsequent amendments; - 93/68/EEC of 22/07/93 and subsequent amendments. 13 Description of the appliance G B Overall view Control panel GUIDES for the sliding racks position position position position position 5 4 3 2 1 GRILL DRIPPING PAN Control panel SELECTOR Knob Indicator light THERMOSTAT TIMER Knob THERMOSTAT Knob 14 Start-up and use !The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may produce a slightly unpleasant odour caused by the burning away of protective substances used during the manufacturing process. Cooling ventilation In order to cool down the external temperature of the oven, some models are fitted with a cooling fan that blows out air between the control panel and the oven door. • The appliance should not be operated by people (including children) with reduced physical, sensory or mental capacities, by inexperienced individuals or by anyone who is not familiar with the product. These individuals should, at the very least, be supervised by someone who assumes responsibility for their safety or receive preliminary instructions relating to the operation of the appliance. General safety • The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. • The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms. • When handling the appliance, always use the handles provided on the sides of the oven. • Do not touch the appliance with bare feet or with wet or moist hands and feet. • The appliance must be used by adults only for the preparation of food, in accordance with the instructions outlined in this booklet. The manufacturer may not be held liable for any damage resulting from improper, incorrect and unreasonable use of the appliance. • When the appliance is in use, the heating elements and some parts of the oven door become extremely hot. • Ensure that the power supply cable of other electrical appliances does not come into contact with the hot parts of the oven. [. . . ] • Never carry out any cleaning or maintenance work without having unplugged the plug from the mains. • In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. Disposal • Observe local environmental standards when disposing packaging material for recycling purposes. [. . . ]