User manual HASBRO SCRABBLE EXPRESS HANDHELD

[. . . ] Before inserting the plug into the electrical socket ensure the following: • The appliance is earthed and the plug is compliant with the law. • The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e. • The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). [. . . ] The activation of this function is indicated by the HOLIDAY LED lighting up. To activate and deactivate the functions, simply press the relevant button; the function status will be signalled by the corresponding LED on the keypad switching on or off. Several of the functions (SUPER COOL, SUPER FREEZE, ICE PARTY, ECO) are incompatible with others (HOLIDAY, . ); remember that there is a preestablished order of priority which will help you to operate the product in the best possible way. When the ICE PARTY function has finished, press the ICE PARTY button to stop the corresponding LED from flashing and to silence the sound alert. The flashing and sound alerts indicate that the function is complete and that the bottle should be removed from the freezer compartment. CHILD LOCK To activate the Child Lock function, press and hold the Child Lock button for 2 seconds; the activation of this button lock is confirmed by a short beep and the illumination of the corresponding LED on the keypad. To deactivate the function, press and hold the Child Lock button for 2 seconds; deactivation will be confirmed by a short beep and by the corresponding LED switching off. GB Navigating the display Setting the temperatures: If the product is switched on, the refrigerator and freezer compartment displays will indicate the temperature values set at that moment. To change them, simply press the - and + buttons corresponding to the compartment for which you wish to change the set temperature. More specifically, each time the buttons are pressed, the temperature increases or decreases and the level of cold generated inside the compartment is adjusted accordingly. 1 2 16 Maintenance Switching the appliance off During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: 1. Press and hold the ON/OFF button for approximately two seconds, until everything on the display switches off apart from the red LED corresponding to the ON/ OFF button. To restore normal operation, it is sufficient to hold the ON/OFF button down for more than two seconds. Replacing the light bulb To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (10 W). GB Cleaning the appliance • The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. • The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance. Avoiding mould and unpleasant odours • The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly. [. . . ] The alarm sounds, the ALARM icon flashes on the display and “A1” appears on the freezer display. The freezer will maintain a temperature of around 0°C so that the food will not refreeze, so that you can decide whether to eat it within 24 hours or refreeze it after it has been cooked. To silence the buzzer, press the ALARM RESET button or one of the freezer temperature adjustment buttons, or open and close the refrigerator door. To remove the “A1” message from the display and restore normal freezer operation, press one of the freezer temperature adjustment buttons twice or switch the product off and on again. [. . . ]