User manual HASBRO PICTIONARY JR.

[. . . ] – Route hoses and cables in such a way that there is no risk of tripping. Scope of delivery depending on model Aqua Stop Aqua Secure Standard Moisture inside the drum is due to final testing. Appliance dimensions depending on model Removing the transport safety devices – Before using the appliance for the first time, the 4 transport safety devices must be completely removed and kept safe. – If you need to transport the appliance at a later date, always refit the transport safety devices to prevent damage to the machine. – Keep the screws and sleeves in a safe place. 87 cm Water connection depending on model – Risk of electric shock. Do not immerse the Aqua-Stop safety device in water (contains an electric valve). [. . . ] WZ 20470, WMZ 20470, Z 7090X0 – Height adjustment kit: order no. WZ 20440, WMZ 20440, Z 7060X0 k j Installation on a pedestal The front feet of the washing machine must be secured with holding brackets. WMZ 2200, WX 975600, CZ 110600, Z 7080X0 Useful tools – Spirit level for levelling – Screwdriver – Drill 5. Secure the hoses in the hose clips. Installation on a wood joist floor – If possible, place the washing machine in a corner. – The feet of the washing machine must be secured with holding brackets. WMZ 2200, WX 975600, CZ 110600, Z 7080X0 Levelling Intense noise, vibrations and “wandering” may be the result of incorrect levelling. Check the levelness of the washing machine with a spirit level and adjust if necessary. The washing machine must not rest against the side panels of the installation recess. The lock nuts of the front appliance feet must be screwed tightly against the housing. To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into compartment II and start the Empty programme. Manufacturer (see instruction manual) 1 2 3 4 5 6 *461166* 7 Installation using slider sheets Hose clamp for securing the water drain hose -> Page 5 Spanner (depending on model) Transportation, e. g. when moving house Product number Production number You can rely on the competence of the manufacturer. – The worktop must have no openings in the area around the washing machine. – Route hoses and cables in such a way that there is no risk of tripping. Scope of delivery depending on model Aqua Stop Aqua Secure Standard Moisture inside the drum is due to final testing. Mains cable Water outlet Water inlet Environmentally-friendly disposal – Dispose of packaging in an environmentally friendly manner. – This appliance is labelled in accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment - WEEE. The directive provides an EU-wide framework for the return and recycling of used appliances. or Installation surface – The machine must be stable so that it does not move around. – Soft floors/floor coverings are not suitable. Covers with hose clip Elbow for securing the water outlet hose Installation using slider sheets Slide sheets make it easier to slide the washing machine into the installation recess. 66 1827 Before sliding in the machine, dampen the slide sheets with a mixture of water and detergent. Do not use any fat and/or oil. Hose clamp for securing the water drain hose -> Page 5 Spanner (depending on model) Parts for assembly -> Page 8 - 13 Installation under a high-level worktop -> Appliance dimensions, Page 3 – Adjustment strips: order no. WZ 20470, WMZ 20470, Z 7090X0 – Height adjustment kit: order no. WZ 20440, WMZ 20440, Z 7060X0 Installation on a pedestal The front feet of the washing machine must be secured with holding brackets. WMZ 2200, WX 975600, CZ 110600, Z 7080X0 Installation on a wood joist floor – If possible, place the washing machine in a corner. – If in doubt, have a technician connect the appliance. Electrical connection The washing machine must only be connected to an alternating current via a properly installed earthed socket. [. . . ] Please give the after-sales service the product number (E no. ) and the production number (FD) of the appliance. This information can be found: on the inside* of the washing machine door and on the back panel of the appliance Product number Production number You can rely on the competence of the manufacturer. This way, you can ensure the repair is carried out by trained service technicians who are equipped with genuine spare parts. Aqua-Stop warranty only for appliances with Aqua-Stop In addition to warranty claims against the vendor from the purchase agreement and in addition to our appliance warranty, we will pay damages under the following conditions: 1. If a fault in our Aqua-Stop system causes water damage, we will reimburse damages caused to private customers. [. . . ]