User manual HASBRO P-O-X

[. . . ] caused by stumbling, open the dishwasher only briefly in order to load and unload the dishwasher. – Read and observe the safety information and instructions for use on the packaging for cleaning and rinsing agents. Delivery – Check the packaging and dishwasher immediately for damage caused in transit. – Please dispose of the packaging material in an environmentally friendly manner. There is a risk of suffocation from collapsible boxes and film. ã=Warning Knives and other utensils with sharp points must be placed in the cutlery basket with the points downwards or horizontally on the knife shelf *. [. . . ] – If using detergents in a water-soluble protective cover: Take hold of the cover with dry hands only and put the detergent into an absolutely dry detergent dispenser only, otherwise the detergent may stick. – If you switch from combined detergents to solo detergents, ensure that the water softening system and amount of rinse aid have been set to the correct value. 14 en Overview of programmes The max. The corresponding programmes for your appliance can be found on the fascia. Type of utensils Type of soiling Programme Possible additional Programme sequence options Prerinse Clean 70° Intermediate rinse Final rinse 65° Dry Is optimised according to the soiling with the aid all of sensors. Prerinse Clean 50° Intermediate rinse Final rinse 65° Dry Intensive zone Prerinse Express Wash/ Clean 40° Speed Perfect Intermediate rinse (VarioSpeed) Final rinse 55° Half load Dry Extra drying Clean 45° Extra drying Intermediate rinse Final rinse 55° none Prerinse pots and pans, non-sensitive utensils and cutlery very adhesive burned-in or dried-on food remnants containing starch or protein ±/° Intensive 70° Á Auto 45° – 65° mixed utensils and cutlery part dried, common household food remnants á/à Eco 50° sensitive utensils, cutlery, slightly adhesive, temperaturefresh food remnants sensitive plastic and glasses é/è Gentle 40° ñ/ð Quick 45° all types of utensils cold rinsing, intermediate cleaning ù/ø Prerinse Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes can request the conditions for running comparison tests by sending an e-mail to dishwasher@test-appliances. com. Quote the appliance number (E Nr. ) and the production date (FD) which you can find on the rating plate 92 on the appliance door. 15 en Additional options * depending on model Additional options can be set with the buttons X. osd)ehcEWf a/SpPrt(Vix Washing the dishes Programme data The programme data (consumption values) can be found in the summary of instructions. water temperature or line pressure may result in deviations. auqArosne Ÿ Express Wash/ Speed Perfect/ (VarioSpeed) * This function can reduce the running time by approx. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased. Aqua sensor * fodH al § Half load * If you have only a few items to wash (e. g. It is recommended to put a little less detergent in the detergent dispenser than for a full load. · Hygiene * egH yin * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3–6 litres. If the turbidity is greater, the water is drained and is replaced with fresh water. Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers. Regularly wipe the front of the appliance and fascia with a damp cloth; water and a little washing up liquid are adequate. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces. Stainless steel appliances: To prevent corrosion, avoid using sponge cloths or wash them out thoroughly several times before using for the first time. Changing the programme When the START button @ has been pressed, the programme cannot be changed. The only way a programme can be changed is by Cancel programme (Reset). Intensive drying The final rinse uses a higher temperature which improves the drying result. – Rotate programme selector 8 until : is indicated on the digital display H. The factory-set value : is lit on the digital display H (intensive drying off). Change the setting as follows: – By rotating the programme selector 8, you can switch intensive drying on : or off : . The set value is saved. ã=Warning Never use other chlorinated household detergents!Health hazard! Special salt and rinse aid – Check the refill indicators h and `. If required, refill salt and/or rinse aid. 18 en Filters The filters 1R keep large foreign objects in the rinsing water away from the pump. [. . . ] temperature 60 °C. Fresh water connection – Connect the fresh-water connection to the tap according to the installation instructions with the enclosed parts. Ensure that the fresh-water connection is not kinked, crushed or twisted. – When replacing the appliance, always use a new water supply hose. Inlet rate: minimum 10 litres/minute Water temperature: cold water preferred; hot water max. [. . . ]