User manual HASBRO ALPHIE

[. . . ] Before you Start Remove the existing version of Unimessage Pro from your system: 1. Select Unimessage Pro and click Add/remove to start the removal process. After the setup program has automatically started, select your product, then click Setup Unimessage Pro and follow the on-screen instructions. [. . . ] After the setup program has automatically started, select your product, then click Setup Unimessage Pro and follow the on-screen instructions. Note: If the setup program does not automatically start or Auto insert notification is turned off, click StartRun. . . . Type in D:\SETUP. EXE (where D is the drive letter of your CD-ROM drive) and click OK. Details of all the installation options can be found in the User's Guide --click View Unimessage Pro User's Guide on the CD's setup menu. When the Unimessage Pro installation is complete, you must restart your PC. When following the on-screen instructions, make sure you select the following when prompted: Yes, look for devices connected to this computer and install the appropriate drivers and CLASS 1 device. Status Monitor Icon The Windows printer driver for your MFP includes a status monitor, which appears in the system tray on the taskbar of the server. MFP as Network Printer You can also use your MFP as a network printer using Unimessage Pro LAN. Follow these additional steps to set up the fax server PC (connected to the MFP) and the client(s) for network printing. Fax Server 1. Make sure the MFP drivers are installed on the fax server PC and that Unimessage Pro LAN is installed. Set up the MFP driver as a shared printer with an assigned name: From SettingsPrinter, rightclick the MFP icon and select Properties. Open the Sharing tab, select Shared, then enter a name. Client Windows 2000/NT 4. 0/Me/98/95 1. If you know the path name for the MFP, enter it, click Next, and skip to step 6. When prompted "Do you want this to be the default printer?" select Yes and click Next. [. . . ] Open the Sharing tab, select Shared, then enter a name. Client Windows 2000/NT 4. 0/Me/98/95 1. If you know the path name for the MFP, enter it, click Next, and skip to step 6. When prompted "Do you want this to be the default printer?" select Yes and click Next. [. . . ]