User manual HANNA INSTRUMENTS HI 98307

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HANNA INSTRUMENTS HI 98307. We hope that this HANNA INSTRUMENTS HI 98307 user guide will be useful to you.

HANNA INSTRUMENTS HI 98307 : Download the complete user guide (148 Ko)

You may also download the following manuals related to this product:

HANNA INSTRUMENTS HI 98307 (801 ko)

Manual abstract: user guide HANNA INSTRUMENTS HI 98307

Detailed instructions for use are in the User's Guide.

 [. . . ] · Conmet®3 (HI 98307) Conductivity Meters with Automatic Temperature Compensation
(HI 98306)
Specifications Range Resolution Accuracy (@20°C/68°F) Calibration Temp.  [. . . ] Operations: · Connect the conductivity probe to the meter (Fig. 1) and turn the unit on by sliding the ON/OFF switch on the top of the instrument. · Dip the probe into the solution by ensuring that all 4 rings of the probe are immersed and without exceeding the maximum level (Fig. · Stir gently to remove any air bubbles trapped inside the probe and wait for the reading to stabilize. · To minimize errors,  it is recommended to rinse the probe with some of the sample to be tested before taking measurement. · After use,  switch the unit off,  rinse the probe in alcohol for a few minutes.  [. . . ] · If necessary,  correct the reading to the solution value by slowly turning the calibration trimmer with the supplied screwdriver. 

ISTCONMET 05/05 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HANNA INSTRUMENTS HI 98307

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HANNA INSTRUMENTS HI 98307 will begin.