User manual HANNA INSTRUMENTS HI 981401

[. . . ] This instrument is in compliance with the directives. FUNCTIONAL DESCRIPTION Range Resolution SPECIFICATIONS 0. 0 to 14. 0 pH 0. 1 pH ±0. 2 pH ±0. 1 pH Manual with two trimmers for offset and slope HI 1286 interchangeable pH electrode and HI 1283 grounding probe (included) IP54 External 12 VDC (included) 86 x 94 x 33 mm (3. 4 x 3. 7 x 1. 3) 150 g (5. 3 oz) Accuracy (@ 25°C/77°F) Typical EMC Deviation Calibration Probes Casing Power supply Dimensions Weight PRELIMINARY EXAMINATION Remove the instrument from the packing material and examine it carefully. If any damage has occurred during shipment, immediately notify your Dealer or the nearest Hanna Customer Service Center. The meter is supplied with: HI 1286 pH electrode; HI 1283 grounding probe; Calibration screwdriver; pH 4. 01 and 7. 01 buffer solutions (20 mL each); 12 VDC power adapter. http://www. hannainst. com This Instrument is in Compliance with the CE Directives Note: Conserve all packing material until the instrument has been observed to function correctly. [. . . ] To validate your warranty, fill out and return the enclosed warranty card within 14 days from the date of purchase. Reproduction in whole or in part is prohibited without the written consent of the copyright owner, Hanna Instruments Inc. , Woonsocket, Rhode Island, 02895 , USA. Hanna Instruments reserves the right to modify the design, construction and appearance of its products without advance notice. GENERAL DESCRIPTION pH is a pH meter specially designed to meet the needs of growers in greenhouses and hydroponic applications. It is equipped with a large LC display which make easy to read measurements from distance at any time. The HI 1286 gel-filled pH electrode is interchangeable and the BNC connector is protected behind a waterproof sheath. The meter is also supplied with HI 1283 stainless steel probe to prevent potential grounding problems and thus ensuring longer life for your electrode, which has been designed for use in fertilizer solutions with high concentration of phosphate and nitrate. You can simply hang the meter right above the sample to be tested for continuous measurement, and it will run without interruption on 12 VDC power supply. Measurements are highly accurate and the meter can be calibrated at one or two points. 1. 10. Molded eye pH 4. 0 calibration trimmer BNC connector HI 1283 stainless steel grounding probe HI 1286 pH electrode 12 VDC power adapter Power supply connector Protective sheath pH 7. 0 calibration trimmer Liquid Crystal Display (LCD) Do not be alarmed if white crystals appear around the electrode protective cap. This is normal with pH electrodes and they dissolve when rinsed with water. When not in use, rinse the electrode with water to minimize contamination and store it with a few drops of storage (HI 70300) or pH7 (HI 7007) solution in the protective cap. If the electrode has been left dry, soak the tip in a storage (HI 70300) or pH7 (HI 7007) solution for at least one hour to reactivate it. To minimize clogging and provide longer life for the pH electrode, it is recommended to clean it monthly. Immerse the tip of the electrode in HI 7061 for one hour and then rinse it with tap water. CALIBRATION For the greatest accuracy, frequent calibration of the instrument is recommended. In addition, the instrument must be recalibrated whenever: a) The pH electrode is replaced. [. . . ] To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed 24 VAC or 60 VDC. To avoid damages or burns, do not perform any measurement in microwave ovens. ACCESSORIES Stainless steel grounding probe with 2 m (6. 6) cable HI 1286 Double junction, plastic body pH electrode with 2 m (6. 6) cable and BNC connector HI 70004P pH 4. 01 solution, 20 mL sachet (25 pcs) HI 70007P pH 7. 01 solution, 20 mL sachet (25 pcs) HI 7004L pH 4. 01 solution, 460 mL bottle HI 7007L pH 7. 01 solution, 460 mL bottle HI 7061L Electrode cleaning solution, 460 mL bottle HI 710005 12 VDC power adapter, US plug HI 710006 12 VDC power adapter, European plug HI 710012 12 VDC power adapter, Australian plug HI 710013 12 VDC power adapter, Southern Africa plug HI 710014 12 VDC power adapter, UK plug HI 77400P pH 4 & 7 solutions, 20 mL sachet (5 each) * To be replaced only by authorized service technicians IST981401NR1 09/00 HI 1283 * The LCD will show the pH value. Allow the reading to stabilize and pH will start continuous monitoring. [. . . ]