User manual HANNA INSTRUMENTS HI 151-00

[. . . ] SPECIFICATIONS HI 151-00 Range -50. 0 to +220°C Resolution 0. 1°C (-50. 0 to 199. 9°C), 1°C (200 to 220°C) Accuracy ±0. 4°C±1 digit (-20. 0 to 90. 0°C); (@25ºC/77ºF) ±1% f. s. ±1 digit (outside) Typical EMC Deviation ±0. 3°C HI 151-01 -58. 0 to +428°F 0. 1°F (-58. 0 to 199. 9°F), 1°F (200 to 428°F) ±0. 8°F±1 digit (-4. 0 to 194. 0°F); (@25ºC/77ºF) ±1% f. s. ±1 digit (outside) Typical EMC Deviation ±0. 6°F Range Resolution Accuracy Common specifications Probe Stainless steel sharp probe (117 x 3. 5 mm) Calibration In factory only Battery Type/Life 1x1. 5V AA / 25. 000 hours of continuous use Auto-off after 5 minutes Dimensions 165x50x20 mm (6. 5 x 2. 0 x 0. 8") Weight 100 g (3. 6 oz) Instruction Manual Checktemp 4 (HI 151-00 and HI 151-01) Rugged Folding Thermometers WARRANTY HI 151-00 and HI 151-01 are warranted for one year against defects in workmanship and materials when used for its intended purpose and maintained according to instructions. Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered. [. . . ] Operation of these instruments in residential areas could cause unacceptable interferences to radio and TV equipment. Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC performance. To avoid electrical shock, do not use these instruments when voltages at the measurement surface exceed 24 VAC or 60 VDC. To avoid damages or burns, do not perform any measurement in microwave ovens. IS151-R5 12/02 www. hannainst. com These Instruments are in Compliance with the CE Directives Checktemp 4 are high accuracy thermometers, easy to use, offering quick and precise measurements. The sharp stainless steel probe is specially designed for penetration of cooked as well as on semi-frozen food. In addition, the probe nestles in the casing to make the thermometers truly portable. Every time the meter is turned on, it performs a self test of its calibration status and provides a visual confirmation. Two models are available: · HI 151-00 measures temperature in °C · HI 151-01 measures temperature in °F. The meters are calibrated using four temperature points. CALIBRATION SELF CHECK Every time the meter is switched on, it checks its calibration status. If the LCD displays "CAL" and then -0- the meter is calibrated and in a few seconds it will be ready for normal operating mode. [. . . ] Wait for a few seconds for the reading to stabilize and for the temperature value be displayed on the LCD. · Turn the meter off by closing the probe and returning it to its original position. CE DECLARATION OF CONFORMITY Note: Clean the probe after use and before storing it. [. . . ]