User manual HAIER LTF32R3A

[. . . ] Please read this manual carefully before operating the unit, and keep it for future reference. Get to know your TV Get to know your remote control Connecting your TV Preparation of your remote control P. Setting up Tuning your TV Common interface Using your TV Adjusting picture settings Adjusting sound settings Function settings Time settings Lock menu settings Shortcut menu display P. Thanks for buying this 26"/32"/42" HD Ready Digital LCD TV. [. . . ] Select Cool to give the white colour a blue tint, Normal to give the white colour a neutral tint, Warm to give the white colour a red tint. Noise Reduction Automatically filters out and reduces the image noise and improves picture quality when receiving weak video signals. When you are satisfied with your choice, press the EXIT AVL < SRS TS XT < button to return to normal viewing or press MENU button to Digital Audio Output< Equalizer return to the previous menu. This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position. press button to select Standard/Music/Theater/User according to the program. Press press Press button to select Primary/Secondary item, and then button to select the languages you needed. When you are satisfied with your choice, press the EXIT button to return to normal viewing or press MENU button to return to the previous menu. You can quickly select the desired mode by ARC button on the remote control. 4:3 mode Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides. 16:9 mode Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. Zoom1 Choose Zoom1 when you want to view the picture without any alteration. Zoom2 Choose Zoom2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. Wide Choose Wide when you want to adjust the picture in a non-linear proportion, that is, more enlarged at top sides and no alteration, at bottom side. SCART Input When you use the SCART2 input , make sure the input source is AV or S-VIDEO, and set the SCART INPUT option. Each press of button repeatedly to select the number of preset minutes, the Time will be set in sequence: off, 10sec, 15sec, 30sec, 45sec, 60sec. NOTE: In DTV mode, because the time information is from the signal, the Clock and Date are not able to be changed. If you want to change the time, turn off the TV in ATV mode, then turn on the TV. The TV will remember it after your setting, that will be the volume when turn on the TV next time. Press button to unlock all set modes, setting all lock options to off, and the maximum volume returns to 100. When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. 2 If you want to recover the sound, press the MUTE button again or directly press V+ button. [. . . ] In zoom mode use the , , and buttons to display a different section of the enlarged picture on the screen. Press SUBTITLE repeatedly until SUBTITLE OFF is shown to switch the subtitles off. USING REPEAT MODE Press REPEAT once to repeat the chapter on a DVD, twice to repeat the currently playing title or three times to repeat the whole contents of the disc. Different camera angles may include: front, side, whole view or exterior. [. . . ]