User manual HAIER L26A9A-A1

[. . . ] Thanks for investing in a Haier product. Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product. [. . . ] 5 Press VOL-/+ button repeatedly, till the best picture and sound are obtained. If you are familiar with the frequency value, press the desired digits direct. Or press VOL+/- button to surpass for 3 seconds, then become semiautomatically searches for channel, till the channel is obtained. MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER Program Number Edit Name Color System Sound System Skip AFT Manual Search 18 C 28 AUTO D/K OFF OFF 62. 25MHz AFT(Auto Fine Tuning) If the picture and/or sound are poor, try using the Auto Fine Tuning feature. Do not use this feature unless reception is poor. 1 Press MENU button and then use CH+/- button to select the TUNING menu. MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER 2 Press VOL+/- button and then use CH+/- button to select Tuning Program. Tuning Program Country Auto Search Program Table England 3 Press VOL+/- button to enter the submenu. 4 Press CH+/- button to select AFT. 6 Press the EXIT button to return to normal viewing or press MENU button to return to the previous menu. Note If the AFT harmonious effect is not good, suggested uses manually searches for the adjustment picture the effect MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER Program Number Edit Name Color System Sound System Skip AFT Manual Search 18 C 28 AUTO D/K OFF OFF 62. 25MHz Tuning menu Program Table 1 Press MENU button and then use CH+/button to select the TUNING menu. MENU 2 Press VOL+/- button and then use CH+/button to select Program Table. PICTURE AUDIO ADJUST TUNING Tuning Program Country Auto Search Program Table England 3 Press VOL+/- button to enter the submenu. You can press CH. LIST button again to enter the submenu. 4 Press CH+/- button to select the edited channel, and press button corresponding to edit. Red button: delete channel name Green button: copy channel Yellow button: Name channel Blue button: Swap FUNCTION TIMER Program Table 001 002 003 004 005 006 007 008 009 010 Red: Del; Green: Copy; Yellow:Name; Blue: Swap Delete name 1 Press CH+/- to select the channel; 2 Press the red button on the remote control to delete; 3 Press MENU button to delete name. Copy edit name 1 2 3 4 Press CH+/- to select the channel, Press the green button on the remote control, Press CH+/- button to select the channel to copy, Press MENU button to ensure. Name channel 1 2 3 4 5 6 Press CH+/- to select the channel; Press the yellow button on the remote control; Press the yellow button to display the digital and letter list; Press Vol+/- or CH+/- to select the desired digital or letter; Press the yellow button to exit list; Press MENU button to ensure. Swap channel 1 2 3 4 Press Press Press Press CH+/- to select the channel; the blue button on the remote control; CH+/- button to select the channel to swap; again the blue button to ensure. Tuning menu If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. 1 2 3 Press MENU button and then use CH+/button to select the TUNING menu. Press VOL+/- button to enter the submenu. MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER Tuning Program Country Auto Search Program Table England 4 Press CH+/- button to select Color System. 5 Press VOL-/+ button to select the correct color system (AUTO, NTSC, PAL, SECAM and NT4. 43). 6 Press the EXIT button to return to normal viewing or press MENU button to return to the previous menu. MENU PICTURE AUDIO ADJUST If sound is abnormal Press CH+/- button to select "Sound System", then press VOL-/+ button to select the correct sound system. Note : when the personal mode is not selected, the personal mode will be entered automatically if Contrast, Brightness, Saturation, Hue, Sharpness parameters are adjusted. Sound Adjustment Sound modes The sound mode provides the pre-defined sound settings. Press the S. STD button to select the option. (Music/Standard/Personal/Hall) This select the modes for sound reproduction dependent on the broadcast signals or signals from external inputs received. Press CH+/- button to Select Audio Mode, press VOL+/- button to select the Music Standard Personal or Hall. Personal: A spare setting that can be adjusted to personal tastes Standard: Normal sound with moderate bass and treble setting Hall: Designed to reduce the bass and treble which enhances the voice for news programs Music: Enables extra bass and treble to enhance the movie experience How to customize your own sound status Press MENU button and then use CH+/- button to select the AUDIO menu. 2 Press VOL+/- button and then use CH+/- button to select the item to adjusted . 4 When you are satisfied with your choice, press the EXIT button to return to normal viewing or press MENU button to return to the previous menu. Volume This will adjust the sound output level. 1 MENU PICTURE AUDIO ADJUST TUNING FUNCTION TIMER Volume Balance Audio Mode Treble Bass Auto Volume Woofer 0 0 Music 0 0 OFF 0 Balance This will adjust the output of the right and left speakers to obtain the best reproduction for your listening position. When indication value of Balance increases toward+50, sound of the right and left speaker becomes stronger and weaker, respectively. When indication value of Balance decreases toward -50, sound of the right and left speaker becomes weaker and stronger. Auto Volume Each broadcasting station has its own signal conditions, making it sometimes difficult to a djust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel and reduces the volume differences between channels and programs, providing a more constant overall level. [. . . ] 2 If you want to stop the function during auto tunning, simply press SCAN button again. Sleep The TV set will switch automatically to standby at the preset time with the SLEEP time on. You may set the sleep time, Operate as follows: 1 Press SLEEP button repeatedly to select the number of preset minutes, the timer will be set in sequence: 0Min 5Min 15Min 30Min 60Min 90Min 120Min 0Min Note: If the Off time on the TIMER menu is set, when press SLEEP button, the 0Min will display on the screen. Note: The Time On setup and the SLEEP setup is absolute one another. 2 After the sleep time is set, the Indication will appear on the screen 1minute prior to expiry of set time. 3 If remaining time of set timer is to be displayed, press SLEEP button again. The TV set will switch off automatically at the preset time, press CH+/- button to turn on again. [. . . ]