User manual HAIER HSU-09LA10

[. . . ] Note: When the air conditioner is on timer operation, if you want to reset the timer you must cancel the former timer, or the setting will not in accord with actual condition. OPERATION MODE button Press it to select operation mode: AUTO COOL HEAT FAN DRY MODE Press it to start turbo function and press again to stop it. I/O TEMPERATURE ADJUSTMENT buttons FAN SPEED INOIZER RUN/STOP button Press it once, the setting tempera-ture decreases by 1 . The range of setting temperature is 16-31 . FAN SPEED button Turns unit ON/OFF. TEMPERATURE ADJUSTMENT buttons Clock set As long as the remote controller is on power, the clock will run all the time and it can be adjusted in any condition even when the air conditioner is off. ¡ ± While the air conditioner is electrified for the first time, the time of the¡ clock ± ¡of is " 0:00 ", the flash± ": " means the clock counts the time automatically. Press the button "Timer/CL" for 3 seconds, the time of the clock can be adjusted. At that time the time of hour flashes, during this period you can add the time of hours by pressing the button " " and reduce the time by pressing the button" ". [. . . ] TURBO function (only applied to turbo series) This function will make the air conditioner heat or cool quickly and during this period, the noise of the air conditioner will increase. Turbo function can be only started up in heat or cool mode(turbo heating or turbo cooling) otherwise, it can not be started up. When the air conditioner is in cool or heat mode, press turbo button to initiate turbo function, the remote con-troller displays "TURBO" and the icon of fan speed is " ", meanwhile the air conditioner cannot be controlled by the remote controller. Press turbo button again or start up sleep mode or transit modes to exit turbo function. COOL mode Press UP & DOWN SWING button to change up/down air flow direction and LEFT & RIGHT SWING button to change left/right air flow direction. Press TEMPERATURE ADJUSTMENT button to change the set temperature. 7. ADJUSTMENT OF AIR FLOW DIRECTION UP & DOWN SWING function Every press of the UP & DOWN SWING button, the angle of the up and down swing louver will change in the order of SWING . DRY mode In this mode, the air conditioner automatically sets the room temperature and this temperature will not appear on display. TEMPERATURE ADJUSTMENT button and FAN SPEED button are not functional. Press UP & DOWN SWING button or LEFT & RIGHT SWING button to change air flow direction. swing icon displays dynamically, meanwhile the letter " SWING " displays above the icon. LEFT & RIGHT SWING function(only applied to left & right swing series) Every press of the LEFT & RIGHT SWING button, the angle of the swing louver will change in the order of SWING . Press UP & DOWN SWING button or LEFT & RIGHT SWING button to change air flow direction. Press FAN SPEED button to change the fan speed of indoor unit. dynamically, meanwhile the letter " SWING " displays above the icon. 3 4 8. SLEEP mode Normal sleep 123 Sleep mode 2 2 When the air conditioner is in cooling and dry mode, the indoor fan runs at low speed. After one hour of operation the set temperature will increase by 1 . One hour later, the set temperature will increase by 1 once more. The unit will then continue operating at 2 above the set temperature. When the air conditioner is in heating mode , the indoor fan runs at low speed. Sleep mode 1 1 When the air conditioner is in cooling and dry mode and 23¡ st 16æ , ¡ during the 3 hours after sleep mode 2 start up , the set temperature will increase by 1 every hour . The unit will continue operating at 3 above the set temperature. 7 hours later, the set temperature will decrease 1 . æ When 24¡ st 27æ , during ¡ 2 hours after sleep mode 2 start up, the the set temperature will increase by 1 every hour . The unit will continue operating at 2 above the set temperature. 7 hours later, the set temperature will decrease 1 , the unit will continue operating at this temperature . When 28¡ st 31æ , the unit¡will operate at the set temperature all along. æ When the air conditioner is in cooling and dry mode and 23¡ st 16æ , during the 3 hours after sleep mode 1 start up , the set temperature will increase by 1 every hour . The unit will continue operating at 3 above the set temperature. [. . . ] When 28¡ st 31æ , the unit¡will operate at the set temperature all along. æ When the air conditioner is in heat mode and18¡ operate at the set temperature all along. st 16æ , the unit will ¡ æ ¡ 5 6 When 19¡ st 25æ , during ¡ 2 hours after sleep mode 3 start up , the the æ set temperature will decrease by 1 every hour. ¡ æ When 26¡ st 31æ , during the 3 hours after sleep mode 3start up, the set temperature will decrease by 1 every hour. [. . . ]