User manual HAIER HS-06C03

[. . . ] and timer time. ON/OFF button TIMER indicator It turns on during TIMER running. TEMP. set 4 Air Conditioner Edition:2006/02/07 Display Operation Signal indicator Lights up when sending a signal to the unit Temp. Set Used to select temp setting Timer Temp. indicator To show temp. setting selected Used to set timer setting SLEEP TIMER OFF TIMER ON BLANK Timer indicator To show time mode display Mode Used to select operation mode AUTO COOL DRY FAN Time display To show the number of hour selected to timer ON/OFF Fan Used to select desired fan speed AUTO HI LOW Operation mode indicator To show mode selected ON/OFF Press it to start unit and press Fan speed indicator To show Fan speed selected it again to stop 5 Air Conditioner Edition:2006/02/07 Cool Operation Remote Controller 1. Unit start Press ON/OFF on the remote controller, unit starts. 2. Select operation mode Press MODE button. [. . . ] Unit start Press ON/OFF on the remote controller, unit starts. 2. Select operation mode Press MODE button. For each press, operation mode changes as follows: Remote controller: AUTO COOL DRY FAN 3 3 Then Select COOL operation 3. Select temp. setting Press TEMP. button Every time the button is pressed, temp. setting increase 1oC, if kept depressed, it will increase rapidly Every time the button is pressed, temp. setting increase 1oC, if kept depressed, it will decrease rapidly Select a desired temperature. 2 4 4. Fan speed selection Press FAN button. For each press, fan speed changes as follows: Remote controller: AUTO HI LOW 1 5 When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature. 5. Unit stop Press ON/OFF button, the unit stops. Cautions To protect unit system, don`t restart until 3 minutes have elapsed If the unit has been running under large humidity for a long time, dew might occur at outlet grating 6 Air Conditioner Edition:2006/02/07 Auto mode 1. Unit start Press ON/OFF on the remote controller, unit starts. Remote Controller 2. Select operation mode Press MODE button. For each press, operation mode changes as follows: Remote controller: AUTO COOL DRY FAN 3 Then Select Auto operation 3 3. Select temp. setting Press TEMP. button Every time the button is pressed, temp. setting increase 1 C, if kept depressed, it will increase rapidly Every time the button is pressed, temp. setting increase 1 C, if kept depressed, it will decrease rapidly Select a desired temperature. 2 4 4. Fan speed selection Press FAN button. For each press, fan speed changes as follows: Remote controller: AUTO HI LOW 1 5 Air conditioner is running under displayed fan speed. Unit start Press ON/OFF on the remote controller, unit starts. 2. Select operation mode Press MODE button. For each press, operation mode changes as follows: Remote controller: AUTO COOL DRY FAN Then Select FAN operation 2 3. Fan speed selection Press FAN button. For each press, fan speed changes as follows: Remote controller: HI LOW 3 Select desired fan speed. Change air flow if necessary 1 4 4. Unit stop Press ON/OFF button, the unit stops. Hints In FAN operation mode, the unit will not operate in COOL mode but only in FAN mode , AUTO is not available in FAN mode. And temp. setting is disabled. In FAN mode, SLEEP operation is not available. 10 Air Conditioner Edition:2006/02/07 Sleep operation 1. Every time the button is pressed, display changes as follows: Remote controller: SLEEP TIMER OFF TIMER ON BLANK Select "SLEEP" function 2 Hints Before going to bed, you can simply press the SLEEP button and unit will operate in SLEEP mode and bring you a sound sleep. Use of SLEEP function After the unit starts, set the operation status, then press SLEEP button before which the clock must be adjusted and time being set. setting so that room temperature won't be too Iow for your sleep. [. . . ] Use of SLEEP function After the unit starts, set the operation status, then press SLEEP button before which the clock must be adjusted and time being set. setting so that room temperature won't be too Iow for your sleep. In AUTO mode The unit operates in corresponding sleep mode adapted to the automatically selected operation mode. [. . . ]