User manual HAIER DW9-AFE ME

[. . . ] - After removing the packing, check to make sure that the appliance is not damaged. - The dishwasher must only be used by adults for the washing of household dishes and cooking utensils. - The appliance is not intended for use by young children or inform persons without supervision. - Young children should be supervised to ensure that they do not play with the appliance. [. . . ] Especially long utensils should be placed in the horizontal position at the front of the upper rack. Load for 9 Standard Settings fig. A fig. B How to use the upper rack The upper rack is designed to hold more delicate and lighter dishware, such as glasses, cups and saucers, plates, small bowls and shallow pans (as long as they are not too dirty). - Position the dishes and cookware so that they do not get moved by the spray of water. The upper rack can be adjusted for height by using the knobs located on the sides of the rack itself (see fig. C). fig. C fig. D Shelf Lean tall glasses and those with long stems against the shelf-not against other items to be washed. The additional cup rack can be swivelled in or out as required(see fig. D). . 5. GB Turning on the Appliance Starting a wash cycle After having completed all of the installation steps in the preceding paragraphs, turn on the water all the way and press the ONOFF button (D) located on the control panel. At this point, the appliance is on but you must wait a few seconds before programming the cycle setting. Setting the Wash Cycle with a Delayed Start Time By pressing the "F" button (see close-up view-'Control panel") the start of wash cycle can be delayed for between 1 to 12 hours. Each time the button is pressed, the display (G) will show the number of hours for the delay period. After selecting the wash cycle, a short acoustic signal will sound and after a few seconds, the delay time on the display will blink, This indicates that the countdown has begun. Setting and Starting a wash Cycle Select the desired cycle by pressing the selector button (I). Each time the button is pressed, one of the "J" cycle indicator lights will come on in succession. Choose the wash cycle you feel is most appropriate for the type of dishes that need washing (consult the wash cycle table contained in this manual. After a few seconds, the wash cycle has begun and can no longer be changed. After the time has lapsed, the cycle will start. NOTE: During the delay period, it is preferable not to change any of the settings, If this is necessary, all of the settings must be cancelled by pressing the ON/OFF button (D). At this point, all of the steps for "setting the wash cycle with a Delayed Start Time" and "Setting and Starting a wash cycle" must be repeated, following the instructions contained in the corresponding sections. If the door is opened to the unit during the delay period, the countdown will stop. It will begin again when the door is closed. Cancelling or modifying a cycle A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have already been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the paragraph entitled, "Loading the Detergent"). To modify a cycle that is already underway, press the ON/OFF button (D), all of the settings will be cancelled. To set a new cycle, follow the instructions contained in the paragraph entitled "Setting and starting a wash cycle". All of the wash cycle set to reverse time function, we may in focus start circulate time. Wash Cycle adjustment Buttons Wash Cycle Program Light The dishwasher is equipped with a LED indicator light (J) that 1/2 load Button turns on when the appliance is running the wash cycle. This button (see "close-up View - Control Panel", letter"E") makes it possible to wash dishes using only the upper rack if there are not enough dishes for a full load. It can be used before setting any of the wash cycle, except for the intensive cycle ( if included in the wash cycle table). Please keep in mind that the amount of detergent should also be cut in half. At the end of the wash cycle Six beeps will indicate that the wash cycle has finished and the cycle indicator light (J) for the cycle will begin to die out. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better. GB . 6. Energy Saving Tips - It is important to try and run the dishwasher when it is fully loaded in order to save on energy. [. . . ] If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance. Hot Water Connection The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60 . In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced. Attention: The appliance is to be connected to the water mains using new hose-sets and old hose-sets should not be reused! Fig. 1 Installation Drain Hose Connection Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance (see Fig. 2). [. . . ]