User manual HAICOM HI-403
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HAICOM HI-403. We hope that this HAICOM HI-403 user guide will be useful to you.
 |
Manual abstract: user guide HAICOM HI-403
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] One end of the cube is a 6 pin Mini-DIN PS/II female connector for connecting to the power source DC 12V car charger while the other end is a 6 pin Mini-DIN PS/II male connector for connecting to the PS/II GPS receiver. Please consult the enclosed step by step Bluetooth connection set up procedure guides.
Specifications:
HI-403
Bluetooth V1. 1 Compliances Frequency Range : 2. 4 ~ 2. 4835 GHz unlicensed ISM band Interface : USB / UART / SPI Receiver Sensetivity : -80 dBm @ 0. 1% BER Transmitting Power : Class 2 -6 dBm ~ +4 dBm RF Input Impedance : 50 ohms Frequency Hopping : 1600hops/sec. Baseband Crystal OSC : 16MHz Data Rate : Up to 723kb/s Operating Temperature : -30°C ~ +90°C Transmitting Range : 10 meters (Typical) Power Consumption : 45 mA (Typical)
G
P
S
Haicom GPS Receiver Handheld GPS Receiver 5
LED indicator:
Pin Assignment:
Blinking: Searching host device Stay On: Bluetooh connected
Bluetooth Box for GPS Receiver
HI-403 BT Cube
1 2 3 4
2
4
6
PDA Cable/Charger
USB Cable DB9 Cable
PS/II Charger
1
3
5
6 Pin PS/2 Female Color Function CN1 Green RX To BT (From GPS) 5 White TX To GPS (From BT) 4 Red VCC 2 Black GND 1 6 Pin PS/2 Male Color Function CN1 Green TX 5 White RX 4 Red VCC 2 Black GND 1
1
3
5
Optional Accessories: 1 PS/II to PDA cable Charger 2 PS/II to DB9 serial cable 3 PS/II to USB cable 4 PS/II to AC cigarret lighter 5 PS/II (Male) to handheld GPS cable
Model# CHG-XXXX CAB-PS2 CAB-USB CHG-PS2 CAB-XXXX
2 4 6
User Manual
· The specifications are subject to changed without notice · All the names and trademarks are belonging to their respective companies.
Get Connected; Installation Guide
3
Double Click "SPP on HAICOM BT GPS"
1
Double Click the Bluetooth icon
Notebook Installations
PDA Installations
2
Double Click "HAICOM BT GPS"
3
Found the host device
4
For Connected with device
1
Run"My Bluetooth Places" and Double Click the "Find Bluetooth Devices" icon
4
Key in pin code: 0000
5 2
Double Click "HAICOM BT GPS"
Select the correct com port
6
Start GPS, NMEA message inflow
7
More satellites info
5
Connected [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HAICOM HI-403
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HAICOM HI-403 will begin.