User manual GRUNDIG YACHT BOY 2000

[. . . ] In radio mode: changes the frequency down in stages, starts an automatic reverse station search. Selects the frequency in the short wave bands. ENGLISH H M LOCK POWER 1 2 3 METER MS M LOCK POWER 1 2 3 METER 4 5 6 RADIO/BUZZ MEMO TIME SET 7 8 9 RESET SLEEP ALARM MODE 0 FREQ LIGHT METER SLEEP Activates the sleep timer. 31 OVERVIEW ___________________________________________________________ a LOCK LOCK POWER 1 2 3 METER 4 5 6 RADIO/BUZZ MEMO TIME SET 7 8 9 RESET SLEEP ALARM MODE 0 FREQ Activates and deactivates the key lock. Switches the display between the local time, dual time and the alarm time. 0 MODE ALARM MEMO TIME SET 1 2 3 4 5 6 RADIO/BUZZ MEMO TIME SET 7 8 9 RESET ALARM MODE 0 FREQ 32 OVERVIEW ___________________________________________________________ Left side of device MONO/STEREO DC 4, 5V Socket for mains plug (not supplied), input voltage 4. 5 V (200 mA). [. . . ] 4 Press »M S« repeatedly to set the minutes step-by-step or hold down to run through quickly. 5 To store the setting, press »MEMO TIME SET«. Setting the alarm time 1 Keep pressing »MODE« until »ALARM« appears in the display. 3 Press »H A« repeatedly to set the hours step-by-step or hold down to run through quickly. 4 Press »M S« repeatedly to set the minutes step-by-step or hold down to run through quickly. 5 To store the setting, press »MEMO TIME SET«. 40 SETTINGS _____________________________________________________________ Tuning to radio stations There are three ways to tune into stations: automatically ­ with the station search, manually ­ with a step-by-step search through the frequencies, directly - by entering the frequency number. Note: If you have set short wave, select the band you want (see the table on page 26). Press »METER« repeatedly. Automatically 1 Keep pressing »H A« or »M S« until the frequency switches to rapid run-through. ­ The search stops when a station with good reception is found. 41 ENGLISH SETTINGS _____________________________________________________________ Manually 1 Keep pressing »H A« or »M S« until the frequency switches to rapid run-through. 2 When you have nearly reached the frequency you want, briefly press the opposite key (»M S« or »H A«). 3 Press »H A« or »M S« briefly several times to set the frequency step-by-step. Directly 1 Press »FREQ« briefly. ­ The device then switches to the frequency. 42 SETTINGS _____________________________________________________________ Storing radio stations You can store a total of thirty-six radio stations as presets, nine for each wave band (FM, MW, SW1 and SW2). ­ Display: »MEMO« disappears, the number of the preset appears e. g. »3«. 43 ENGLISH SETTINGS _____________________________________________________________ Switching to SW frequency tuning This function lets you tune into the SW frequencies between wave bands and off the wave bands. A B« (in battery compartment) switch to the »A« position. ­ Only stations with frequencies within the wave band can be received. A B« (in battery compartment) switch to the »B« position. ­ Stations with frequencies in the gaps of the wave band can also be received. Switching to MW fine tuning The distance between neighbouring stations on MW range is standardised worldwide. However, North and South America use a different standard to other countries. 1 Move the »AM STEP 9kHz 10kHz« (in battery compartment) switch to the »9kHz« position. ­ MW fine tuning is done in 9 kHz stages (except in North and South America). [. . . ] Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a collection point for recycling electrical and electronic devices. This is indicated by this symbol on the product, in the operating manual and on the packaging. Please find out about collection points operated by your local authority. [. . . ]