User manual GRUNDIG XERIA GV 6263 HIFI

[. . . ] VIDEORECORDER XERIA GV 6263 HiFi DEUTSCH ENGLISH FRANÇAIS CONTENTS ________________________________________________________ 4 GV 6263 HiFi video recorder Packing contents Special features of your video recorder 5 6 Set-up and safety Overview The front of the video recorder The back of the video recorder The remote control The display on the video recorder The OSD display on the television 11 Connection and preparation Placing batteries in the remote control Connection options Connecting the rooftop antenna or cable connection and the television Connecting the GRUNDIG satellite receiver and the television Connecting the GRUNDIG VCR-SAT module and the television Switching the video recorder on and off (energy-saving mode) 18 Tuning Tuning the video recorder and the television Tuning television stations Tuning television stations with the Megalogic function Tuning television station with the automatic station search 22 Playback Basic playback functions Additional playback functions Continuous playback 27 Search functions Zero setting Finding recordings using the Video Index Search System (VISS) 28 Recording The recording options The Video Programming System (VPS/PDC) 29 Recording ­ immediate Recording television programs from the antenna or the cable connection Recording television programs from the satellite receiver Entering the switch-off time Seamless compilation of recordings (Assemble) 2 CONTENTS _____________________________________________________________ 32 Recording ­ delayed ­ by entering the ShowView number ­ by entering the data for the required television program Checking, modifying or deleting recording information Interrupting recording stand-by mode Reactivating recording stand-by mode ­ controlled by a satellite receiver 40 Copying Connection and preparation Recording from external devices 42 Using a decoder Decoder operation with television stations from the antenna or the cable system Recording PAY TV programs 46 Audio playback HiFi audio playback Audio dubbing 48 Special settings Sorting, deleting and renaming television stations Re-tuning television channels Skipping television stations Setting new television stations from the antenna or the cable system Tuning new television stations Switching the station on the video recorder on and off Setting new television stations from the VCR-SAT module Automatically tuning television stations from the VCR-SAT module 56 Setting the date and time Automatically updating the time and date Setting the time and date manually 57 Special features Selecting special features in the »MODE« menu Selecting special features in the »SERVICE« menu 61 62 63 Parental lock Television remote control Rectifying minor problems Technical data GRUNDIG Service (page 67 ) ENGLISH 3 Information GV 6263 HIFI VIDEORECORDER __________ Packing contents 2 3 4 Digital FX 1 Video recorder GV 6263 HiFi 2 EURO-AV cable 3 Antenna cable OSD Clear 1 SP/LP Dub Index Audio VCR1 TV VCR2 VIDEORECORDER Timer/SV 4 Remote control 5 Operating manual 6 2 batteries, 1. 5 V, micro type Timer on 5 6 Monitor P Tele Pilot 93 V Special features of your video recorder The recording options ­ Immediate recording, in which you select the required channel on the video recorder and start recording immediately. ­ Delayed recording by entering the time and channel of the programme you want to record (if you do not know the ShowView number). ­ Delayed recording by entering the data in the TIMER menu of a Grundig television with the Megalogic function. ShowView* recording This function makes recording child's play. Find the program in your TV guide, enter the code number and the video recorder is programmed automatically. GRUNDIG Megalogic Megalogic options: ­ ­ Receiving television stations from the television set ­ in the same order, see page 19. [. . . ] ­ In automatic mode the video recorder compares the remaining playing time with the length set for the recording and automatically selects long play mode if necessary. Note: Automatic mode is not available for TIMER recordings with VPS/PDC. SHOWVIEW NO. : 12555 MODE: ONCE DATE PR START STOP 01/ 05 03 12:00 12:30 S VPS/PDC * : ON ­ : OFF * 6 Switch off VPS/PDC (if it is not required) by pressing »« to select » « and then » + « or » ­ « to switch off VPS. ­ » « in the display denotes VPS recording. < > :SELECT OK :ENTER :CHANGE INFO :EXIT * * 7 Save the recording data by pressing » OK «. ­ The »SHOWVIEW« menu reappears on the screen. ISHOWVIEW NO. : ­ ONCE MODE: 8 For further recordings, repeat the procedure from step 2 or terminate the function by pressing » i«. 9 Press » Timer on« to switch the VCR to recording stand-by. 0-9 :DATA INFO:EXIT Note: The TIMER recording in progress can be prematurely stopped by pressing » Timer on« on the remote control or » I « on the video recorder. 33 ENGLISH ­ The video recorder display now shows the time and the TIMER symbol » «. The video recorder is now in recording stand-by mode. RECORDING ­ DELAYED ______________________________________ . . . by entering the data for the required television program Employ this method of recording if you do not know the ShowView numbers for the television programs. To do this, see the section entitled "Deleting recording data" on Page 38. Operation can be interrupted at any time using the »i« button. Preparation Switch on the television. Select the channel position »AV« on the television for the video recorder. Insert a video cassette with sufficient playing time and the tab intact (i. e. not erase-protected) into the compartment until it is automatically drawn in. If the video recorder is on recording stand-by, this must be interrupted by pressing and holding down the » Timer on« button. Example Note: Enter the date, channel, start and finish time by pressing »+« or » ­ «. The example describes how to enter the data using the numerical buttons » 0 . . . 9 «. DATE --/----/----/----/----/----/--PR ------START --:---:---:---:---:---:-STOP --:---:---:---:---:---:-- 1 Press »i« to begin the setting. S ------ * ­ The main menu appears. 2 Highlight the » TIMER« line by pressing » OK«. ­ The » TIMER« menu appears. 3 Press » OK« to begin entering data. OK :ENTER INFO :EXIT ­ The current date is displayed. 34 RECORDING ­ DELAYED ______________________________________ 4 Confirm the date (DATE) by pressing »«, or S ------ DATE 01/02--/----/----/----/----/--DATE: PR START STOP 02 - - : - - - - : - -- --:-- --:--- --:-- --:--- --:-- --:--- --:-- --:--- --:-- --:-DAY/MONTH 0-9 * enter the desired date in four digits with » 0 . . . 9 «. 5 If you want to record the programme daily or weekly, press »+« or » ­ « to select »D« (daily) or » W « (weekly). » ­ « in the display means that it is a once-only recording. Note: You cannot use the "daily" function for recording on Saturdays and Sundays. <> :SELECT :DATA :CHANGE INFO :EXIT DATE PR 01 / 02 02 --/--- ---/--- ---/--- ---/--- ---/--- -PR :ZDF START --:---:---:---:---:---:-0-9 STOP --:---:---:---:---:---:-- S ------ * 6 Enter the two-digit channel number (PR) using the » 0 . . . Note: If you are recording the audio/video signal from an external device rather than one of the television stations select » AV 1«, » AV 2 «, or » CV« as the channel by pressing »+« or » ­ «. Recording from a satellite receiver: If a television station from a connected satellite receiver is programmed, use » + « or » ­ « to select the channel position »AV 2« and select the desired television station on the satellite receiver. The satellite receiver must be switched on up to the selected recording time and must remain on for the duration of the TIMER recording. (This is not necessary for the Grundig VCR-SAT module or for many Grundig satellite recievers with a SAT control line. ) <> :SELECT :DATA :CHANGE INFO :EXIT DATE 01 / 02 --/----/----/----/----/--- PR 02 ------ START 19: ---:---:---:---:---:-0-9 STOP --:---:---:---:---:---:-- S ------ * <> :SELECT :DATA :CHANGE INFO :EXIT 7 Enter the time to start recording (START) as four digits with » 0 . . . 9 «. 8 Enter the time when the recording finishes (STOP) as four digits with » 0 . . . [. . . ] ­ The display » LOCKED« appears on the television screen, all functions of the video recorder are locked. Switching off the parental lock SERVICE PIN8-CONTROL OFF ----I CHILD-LOCK TAPE-LENGTH E180 CONTINUOUS-PLAY OFF RF-CHANNEL AOFF ATS-RESTART AOFF EXTENDED MENU ---: SELECT OK :ENTER 1 Press »i« to call up the » SERVICE« menu. Note: If you have forgotten the code number, press the buttons »«, »®«, » ­ «, » + «, » OK « in succession to deactivate the parental lock. <> : CHANGE INFO:EXIT 61 ENGLISH TELEVISION REMOTE CONTROL ___________ You can also operate GRUNDIG televisions with the video recorder remote control. The functions available to you depend on the model of the GRUNDIG television. Point the remote control directly at the TV. Digital FX OSD Clear Note: Point the remote control at the television and keep pressing the » Mode« button until the » TV« indicator lights up. [. . . ]