User manual GRUNDIG VCH 5730 HANDSTAUBSAUGER WET DRY

[. . . ] Keep the appliance and the accessories away from eyes and ears while operating. This appliance is designed for vacuuming dirt, dust particles and liquids. Do not attempt to use it on large objects which could block the appliance and damage it. [. . . ] This even inhibits the spread of tiny microscopic particles including house mites, pollen and dust. Dangerous bacteria can hardly survive with the integrated Microban® hygiene protection. Microban® technology has been tested in independent laboratories and certified, thus making a significant contribution towards a healthier household. Accessories I Charging unit for wall mounting with power supply unit (see page 13). J Microban® hygiene protection replacement filter. K Crevice nozzle. M Attachment for wet operation. ENGLISH 11 INDIVIDUAL PARTS _________________________ Your appliance is supplied with three attachments: The crevice nozzle, the upholstery brush and the attachment for wet operation. The parts can be stored in the charging unit. Upholstery brush Use the upholstery brush L for cleaning skirting boards, fabric surfaces such as upholstery and pieces of furniture for example, picture frames. 2 Press the upholstery brush firmly into the suction intake E of the appliance. Crevice nozzle Use the crevice nozzle K for cleaning crevices and corners that are difficult to reach (such as PC keyboard). 2 Press the crevice nozzle firmly into the suction intake E of the appliance. Attachment for wet operation Use the attachment M for cleaning wet surfaces. 2 Press the attachment firmly into the suction intake of the E appliance. Note 7 Always empty the dust container after use to prevent any unpleasant odours. 12 ENGLISH OPERATION_________________________________ Charging unit for wall mounting Attach the charging unit I to the wall. Caution 7 Do not mount the charging unit close to a heating unit or in direct sunlight. Do not mount the charging unit outside. 7 Charging Check to see whether the type plate on the power supply unit corresponds to your local mains supply. 2 Fit the appliance exactly into the charging unit I. Make sure the place you select for mounting is free of any concealed electrical wiring and water or gas pipes. 1 Select a place near a socket (230 V, 50 Hz) for connecting to the power supply unit. 4 Plug the power supply unit into the N charging unit and rotate it by 90°. ­ The charge indicator lights up until the appliance is removed from the charging unit or the power supply unit is disconnected. Notes 7 Charge up the batteries completely (14 hours) before you first use them or if you have not used them for a long time. 7 N Charge the appliance at room temperature. [. . . ] ­ The catch must latch in. 14 ENGLISH INFORMATION______________________________ Environmental note This product has been made from high-quality parts and materials which can be re-used and recycled. Therefore, do not throw the product away with normal household waste at the end of its service life. Take it to a collection point for recycling electrical and electronic devices. [. . . ]