User manual GRUNDIG TK745

[. . . ] * key in idle mode: Press and hold to enable or disable the keypad lock. 0 key in idle / predialing / number editing mode: Press and hold to insert a pause. # key in Call List mode: Press to review caller's number if applicable. D SPEAKERPHONE During a call: Press to turn on / off the speakerphone. [. . . ] Note: If there are no numbers in the redial list, the display shows "EMPTY". Store a Redial Number into the Phonebook 1 Follow Steps 1 and 2 in section Redial a Number from the Redial List 2 Press » « and » « to select ADD TO PB. In keypad lock mode, press and hold » « to turn off the keypad lock. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to another handset and make conference calls. If the called handset is not answered within 60 seconds, the called handset will stop ringing and the calling handset will return to standby mode. Note: If only one handset is registered to the base station, press » « will display "NOT POSSIBLE" Intercom Another Handset 1 In idle mode, press » « and the registered handsets will display except the calling handset. 3 The called handset rings and press » «on the called handset to establish the internal call. Note: If two handsets are registered to the base station, press » « will connect to another handset immediately. You can stop the paging by pressing » «/ » « / » « / » « on any handset or » « on the base again. When the call list is full, the oldest call will be replaced by a new call. The unanswered call which has not been read is marked with a »*« at the centre of the bottom line of the display. Voice Mail Waiting Indication (VMWI) VMWI icon is an indication given to you when a new voice mail message is waiting on the network service provider. This feature is available if you have subscribed to the voicemail service from you network service provider. You can press and hold »Key 1«to dial out to the voice mail number directly to listen to your voice mail messages. To delete a single VMWI entry from the call list: 1 Press » « and » « to select CALL LIST. To delete all VMWI entries from the call list: To delete a single VMWI entry from the call list: 1 Press » « and » « to select CALL LIST. Note: If you choose DELETE ALL function in the call list, the handset will also delete all VMWI entries and CID entries. VMWI icon will display and the VMWI entry is stored in the Call List when you have new message in your voice mailbox. Note: If a more recent VMWI entry is received from the same network server number of an existing VMWI entry, the new VMWI will not be stored but the date/time of the VMWI will be updated on the existing VMWI entry. After you have accessed to all new voice mail messages, VMWI will turn off automatically. [. . . ] « and » « to select BS « to select BS De-register a Handset You are requested to enter the 4-digit PIN in order to de-register a handset from the base station. Note: You cannot de-register the handset that you are currently using. 3 Press » « and » « to select the desired ringer melody (a total of 5 melodies for your selection) Note: The respective ringer melody will be played while browsing the melody list. 3 Press » « and you are requested to enter the 4-digit system PIN. [. . . ]