User manual GRUNDIG SATELLIT 750

[. . . ] Press the ENTER button and notice that -- appears in the upper right corner of the display. While -- appears, enter 09 or 10 with the numeric keypad and press ENTER. With the SATELLIT 750 on, turn the VOLUME knob, located in the lower left front, clockwise to increase the volume, counterclockwise to decrease the volume. Select FM by pressing the FM button, MW(AM) and Longwave by pressing the MW/LW button (press it twice if necessary), Shortwave by pressing the SW button sequentially until you have selected the desired band (the band number flashes in the upper right corner of the display) and the Aircraft band by pressing the AIR button. [. . . ] As long as you are not using headphones or earphones, it can be left in mono mode. There are two separate sets of 500 memories, allowing for great flexibility of memory storage. Memory PAGE 0, noted as `P0', consists of 500 memories, 100 assigned for MW, SW, SSB and Air Band; 50 memories each assigned for FM and LW. To manually store a frequency into a memory, first choose the page, then the memory location and then store the frequency. Turn on the radio and tune to a station that you want to store into memory. Shortly press the MEMORY button (the address page will flash in the right corner of the LCD. Shortly press the PAGE button and use the " / " buttons to select the page that you want to store into; press PAGE again to confirm. Use " / " to select the memory location while it is flashing. To automatically store a frequency into the next available memory on the page that you've selected, press and release `M'. Press `M' to automatically store it into the next available memory or when it stops flashing it's stored into the memory number that was flashing. Store Band Storage space in P0 page P0 (page) ATS Other storage space 10 pages each with 50 memories 20 pages each with 25 memories 25 pages each with 20 memories Turn on the radio and go to the correct page by pressing PAGE and entering it with the numeric keypad. Press and release the VM/VF button and notice that the PAGE and PRESET show in the display's upper right corner. To go from one memory to another give a quick, short press to either the up or down tuning button , or use the tuning knob. To auto-scan memory press one of the up or down tuning buttons for about 2 seconds and notice that PRESET flashes. The radio scans from one memory to another, staying on each memory for about 5 seconds. To stop the scan give the up or down tuning button a quick, short press. Use the numeric keypad, the tuning knob or the up/down tuning ) to select the memory that you want to delete. To buttons ( delete the memory press the DELETE button for about Turn on the radio and select the page that you want to delete by pressing PAGE, note that page flashes in the display's upper right. While it's flashing use the numeric keypad, the tuning knob or the up or down tuning buttons ( ) to select the page that you wish to delete. If - - appears above PRESET in the display's upper right corner, the page is already deleted and you don't have to continue. Press DELETE for about 3 seconds or until PAGE starts blinking and press DELETE again. One can automatically store the strongest LW, AM or FM stations into Page 0. [. . . ] To obtain service for your product, we recommend first contacting an Etón service representative at 1-800-872-2228 US, 1-800-637-1648 Canada, (650) 903-3866, customersvc@etoncorp. Com or your respective country distributor in Europe (see enclosed If further service is required, the technical staff will instruct how to proceed based on whether the radio is still under warranty or needs nonwarranty service. WARRANTY ­ If your product is still in warranty and the Etón service representative determines warranty service is needed, a return authorization will be issued and instructions will be given. DO NOT ship your radio back without obtaining the return authorization. [. . . ]