User manual GRUNDIG RRCD 3400 MP3

[. . . ] In MP3 and CD-DA mode: the current file or the current track is played back repeatedly. M M ALL In MP3 mode: repeats all the files in an album. In MP3 and CD-DA mode: all files or tracks are played back repeatedly. 17 ENGLISH OVERVIEW ______________________________________________________ Power supply Mains operation Note: Check that the mains voltage on the type plate (on the bottom of the device) corresponds to your local mains supply. 1 2 Plug the mains cable supplied (in the battery compartment) into the »AC the radio recorder (back of device). Caution: The only way to disconnect the device from the mains supply is to pull out the plug. ~ « socket on Battery operation 1 2 Open the battery compartment by pressing the catch and removing the lid. [. . . ] However, if the signal from the FM stereo station is weak, you can switch to mono reception. 1 Switch between stereo and mono with »FM MODE MONO/STEREO« (on the back of the device). 21 CD MODE ________________________________________________________ The device is suitable for music CDs bearing the logo shown here (CD-DA), and for CD-Rs and CD-RWs with audio data or MP3 formats. In MP3 mode, the terms "album" and "file" are very important. "Album" corresponds to a folder on a PC, "File" to a file on a PC or a CD-DA track. The device sorts the albums, or the files on an album, by name into alphabetical order. If you wish to order them differently, change the name of the file or album and put a number before the name. When burning CD-R and CD-RWs with audio files, various problems may arise which could lead to interference in playback. This can be caused by faulty software or hardware settings or by the CD being used. Should such problems arise, contact the customer services of your CD burner or software manufacturer or look for relevant information, for example on the Internet. When you are making audio CDs, observe all legal guidelines and ensure that the copyright of third parties is not infringed. Always keep the CD compartment closed to prevent dust from collecting on the laser optics. An adapter is not necessary. Selecting the CD input source 1 2 3 4 Move the »CD TAPE/OFF RADIO« switch to the »CD« position. Press »OPEN/CLOSE« to close the lid of the CD compartment. The total number of tracks and the total playing time appears in the display. CD playback 1 Press »PLAY/PAUSE II« to start playback. To quit the function, press »REPEAT« until the repeat indicator goes out. ENGLISH 23 CD MODE ________________________________________________________ Creating a track memory You can create a track memory of up to 20 files on different albums (MP3) or up to 20 tracks (CD-DA) for the current CD in any order you choose and then play them back in that sequence. Programming is only possible in the stop position. Selecting and storing files (MP3 only) 1 2 3 4 5 Press »PROGRAM« to call up the function. ­ Display: »P 01« for the first preset position, »PROGRAM« flashes. Select the album by pressing »ALBUM-DOWN« or »ALBUM-UP«. Select the file you want by pressing »R-SKIP 8« or »F-SKIP 9«. ­ Display: »P 02« for the second preset position, »PROGRAM« flashes. [. . . ] This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the international safety regulation IEC 60065. The manufacturer will not accept any liability for damage resulting from improper handling. Power supply Mains operation: Battery operation: 230 Volt, 50/60 Hz 6 x 1. 5 V IEC (R20/UM1/D-Size) 16 W <2W MP3 features Playback format: MPEG 1 layer 3 (MP3) Sampling frequency: 44. 1 kHz File system / file management: ISO 9660 Level 1 compatible Max. power consumption Operation: Standby: Tape unit Sound recording medium: Compact cassette according to DIN 45516 Track position: International quarter-track Tape speed: 4. 76 cm/sec. [. . . ]