User manual GRUNDIG RR 630 CD

[. . . ] Changing the batteries If the range of your infrared remote control seems to decrease, or if certain individual functions can no longer be carried out, you should replace the batteries. Caution should be exercised if the set is placed on furniture as surfaces are often coated with lacquers and plastic finishes containing additives which attack the material of which the feet of the set are made, leaving stains which can only be removed with difficulty or not at all. The lens may cloud over if the CD player is moved from cold to warm surroundings. And in the interest of the environment: Remember that batteries must always be disposed of properly. [. . . ] To remove dust and dirt, breathe on the CD and wipe it with a soft, lintfree cloth in a straight line from the center towards the edge. The set is switched off when the FUNCTION switch is in the TAPE/OFF position and no buttons are pressed. CLASS 1 LASER PRODUCT means that the laser´s construction makes it inherently safe so that the legally prescribed maximum permissible ratiation values can never be exceeded. CAUTION: Using any equipment or devices other than those described and specified in these operating instructions, or tampering with the unit in any way, can result in dangerous exposure to radiation. ­ The PLAY/PAUSE 6 indicator will light up and the display shows the track number. ­ The CD player also goes to position STOP: ­ when the end of the CD is reached; ­ if the batteries run down or if the power supply is interrupted. Selecting another track during play · Press R-SKIP Q or F-SKIP R several times until the required track number appears in the display. Starting with a particular track · Press R-SKIP Q or F-SKIP R until the required track number appears in the display. searching for a passage during play · Hold R-SKIP Q down to search backwards to the beginning. note: This function can be described as "audibly" searching for a title. During the search, volume is reduced and returns to its adjusted level as soon as the button is released. ­ The track will now be repeated continuously · Press REPEAT twice to stop the track being repeated. repeating the CD · Press REPEAT twice before or during playback. During playback, press the MODE button on the remote control three times. ­ The tracks are played in random order until all of them have been played once. ­ The display indication toggles between the track number and a moving symbol. The function is deactivated by pressing STOP 9 (in which case the CD stops) or MODE again; in this case the remaining tracks are played in their normal order. By programming the player you can play up to 21 tracks in any desired order. If you exceed the maximum of 21 tracks, the programme function will start again from the first track. Button starts blinking again and the display will show '02'. Press one more time to go back to normal playback Press F-SKIP R repeatedly: the display shows in sequence all programmed track numbers and playback of the respective track starts. While playing a programme, it is possible to use R-SKIP Q or F-SKIP R to select the desired programmed tracks. [. . . ] It's not necessary to start the CD player separately: by pressing 0 the CD player starts automatically. ­ If the CD player is in STOP position, recording will start from the beginning of the CD (or from the beginning of the programmed selection). To start a recording in the middle of a track, play the CD in the normal way. As soon as the desired passage is reached, pause the CD and then start recording by pressing 0. [. . . ]