User manual GRUNDIG PLANIXX CDP 4104 AS 40 PLL

[. . . ] Do not use cleaning agents, as these may damage the casing or the CD. Environmental note As little material as possible was used for packaging your device. It can be divided into two separate materials: cardboard (box) and polyethylene (bag). Please observe the local regulations for disposing of the packing material. Batteries, including those which are heavy metal-free, may not be disposed of with household waste. [. . . ] Plug the mains adapter into the »DC IN 6V« socket on the device and plug the mains adapter onto the mains socket. Note: When buying NiCd batteries, always make sure that approximately 3 mm of the metal end at the negative pole is visible (see illustration). Completely charge up the batteries before you first use them or if you have not used them for a long time. Using the device while the batteries are charging increases the charging time. 3 mm min 21 ENGLISH PREPARATION ______________________________________ Connecting the earphones and the remote control 1 2 Connect the earphones to the » PHONES« socket on the remote control (ø 3. 5 mm). Connect the remote control to the » PHONES 0« socket on the CD player. Listen at a volume which still allows you to hear outside noises such as horns, emergency vehicles and police cars. This portable CD player with headphones meets the requirements set out in Articles LL44. 5 and 6 of the German safety regulations. The output of the device guarantees the best possible sound at medium volume. Prolonged listening at loud volumes can damage your hearing. CHAR GE OP EN VOLUME LINE OUT D AS 22 8 7 8 PROGR. M O DE Adjusting the volume 1 Adjust the volume with » VOLUME on the remote control. g« on the device or »gVOL« Ultra Bass System 1 Press » OFF ULTRA BASS SYSTEM ON« on the device to switch the Ultra Bass system on and off. BASIC FUNCTIONS CD________________________ Selecting the CD input source 1 Press »CD RADIO« on the device to switch to CD mode Inserting a CD The device is suitable for music CDs displaying the logo shown here or for CD-Rs with audio data. As well as standard 12 cm CDs, it can also play 8 cm CDs without an adapter. 1 2 3 Push the » OPEN compartment. 4« slider to the right and open the CD Insert the CD with the label facing upwards and gently push the centre of the CD to latch it into place. Close the CD compartment. Removing the CD Note: Press » STOP I« before you open the CD compartment during playback. Remove the CD Close the CD compartment. 4« slider to the right and open the CD Digital anti-shock system (DAS) The anti-shock system reads the data on the CD 40 seconds in advance. This prevents interruptions to playback due to shocks and vibrations. 0 1 0 0 : 00 p 0 1 0 0 : 08 o 1 Press »D. A. S« to switch on the anti-shock system. ­ Display: » p« and shortly afterwards » o«. Note: When you switch the anti-shock system on or off, playback is delayed or briefly interrupted. Since the anti-shock system requires more power, it is advisable to switch off the function as long as there are no problems with playback, in order to prolong the life of the batteries. 2 Press »D. A. S« to switch off the anti-shock system. 0 2 0 0: 1 2 23 ENGLISH BASIC FUNCTIONS CD __________________________________ CD playback 1 Start playback with » PLAY/PAUSE II«. ­ Display: » - - «, afterwards the number of tracks and total CD playing time (for example »15 57:15«) followed by the first track and the playing time of that track. To pause playback, press » PLAY/PAUSE ­ The track playing time flashes. Press » PLAY/PAUSE 3 End playback by pressing » STOP I«. Note: Playback stops automatically when the end of the CD is reached, if the CD compartment is opened or if the batteries run out. Note: The device switches off automatically after the end of playback if you do not press a button within 30 seconds. II«. 0 1 0 0: 0 1 p 2 II« to resume playback. 15 5 7 : 1 5 p 1 Selecting a different track During playback, keep pressing »5 SKIP« or »SKIP s « until the a 6 number of the desired track appears in the display. [. . . ] 208 g Radio Frequency band: FM 87. 5 ­ 108 MHz Technical and optical modifications reserved! 28 INFORMATION _______________________________________ Troubleshooting If a problem occurs, first refer to this information before you take the device for repair. If you are unable to rectify the fault using the information given here, contact your local dealer or service specialist. Under no circumstances should you attempt to repair the device yourself, as this would invalidate the guarantee. Plug the earphones plug into the »PHONES« socket. The device will not The batteries are incorrectly switch on inserted. [. . . ]