User manual GRUNDIG MUSIC BOY 71

[. . . ] power consumption: Output: Frequency band: 230 V, 50/60 Hz Operation <6W, Stand-by <1W DIN 45324, 10% THD 750 mW FM 87. 5 . . . 108. 0 MHz MW 522 . . . 1. 35 kg Dimensions and weight: Technical and design modifications reserved. 16 OVERVIEW ___________________________________________ DISPLAY M usic Boy 71 PRE SE T 1/6 2/7 2/7 3/8 4/9 4/9 5/10 3/8 TIME TEXT 1/ 6 5 10 MEMO SLEEP ALARM ON ON/OFF OFF SNOOZE DOWN TUNING UP Controls on the top ON/OFF Switches the device on and off; switches off the alarm signal (signal tone or radio station) when the alarm function is activated. PRESET Preset buttons for storing and selecting radio stations 1/6 . . . 5/10 (pressing once selects station positions 1-5; pressing twice selects positions 6-10). ALARM For displaying the alarm time; switches the alarm function ON OFF between radio station, signal tone and Off; activates the alarm time setting. [. . . ] If any other type of plug is used it must be protected by a 5A fuse either in the plug, or at the distribution board. If this type of plug becomes defective, ensure that the fuse is removed before disposal, to eliminate potential shock hazard. If it is necessary to change the fuse in the non-rewireable plug, the correct type and rating (5A ASTA or BSI approved BS1362) must be used and the fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and plug must not be used until a replacement is obtained. Important: The wires in the mains lead are colour coded in accordance with the following code: BLUE ­ NEUTRAL BROWN ­ LIVE As the colours of the wires in the mains lead of your appliance may not correspond with the coloured marking identifying terminals in your plug, proceed as follows: Connect the BLUE coloured wire to plug terminal marked with the letter "N" or coloured black. Connect the BROWN coloured wire to the plug terminal marked with the letter "L" or coloured red. In no circumstance must any of the wires be connected to the terminal marked with the letter "E", earth symbol "z", coloured green, or green & yellow. Replacement mains lead sets can be obtained from your local dealer, or by contacting Grundig Consumer Relations (01788 570088) Moulded 3-pin lead set, suitable for UK use: Ref: Leadset UK 8290-991-224 Moulded 2-pin Euro lead set, not suitable for UK use: Ref: Leadset Euro 8290-991-316 21 ENGLISH SETTINGS ______________________________________________ Setting and storing radio stations . . . . . . with the automatic station search When the device is first connected to the mains or the batteries are first inserted, the device begins an automatic FM station search and stores the first ten stations with strong signals on the preset buttons 1/6, 2/7, 3/8, 4/9, 5/10. The following appears in the display: »SEARCHING FM PLEASE WAIT«. After the search is completed, a demo program with the various RDS functions starts in the display. The demo program can be re-started at any time by pressing and holding down »DISPLAY« and can be ended by pressing any key. However, you can also tune stations manually and store them on the preset buttons. SEARCHING F w PM TEXT f MEMORY RDS FEATURE 1 e t . . . manual w f FANTASY 1 2 3 Press »ON/OFF« to switch on the device. Press »TUNING DOWN « or »TUNING UP « briefly to set the day step-by-step or hold down to run through the days quickly. « or »TUNING UP « to set the 24-hour 16:43 MO 16:39 MO 24HR PM 3 4 5 6 7 8 4:39 TU 9 Press »TIME« to confirm the setting. If the 12-hour format is selected, »PM« appears during the second half of the day. 23 ENGLISH SETTINGS ______________________________________________ Setting the alarm time 1 With the device switched off, press »ON ALARM OFF«. Hold down »ON ALARM OFF« until the hour flashes in the display. Note: If you do not press any button within 8 seconds, the device will quit set-up mode. 3 4 5 6 Press »TUNING DOWN « or »TUNING UP « briefly to set the hour step-by-step or hold down to run through the hours quickly. Press »TUNING DOWN « or »TUNING UP « briefly to set the minutes step-by-step or hold down to run through the minutes quickly. ­ After a short time, the display changes to the current time. 6:30 AL 2 7:30 AL 7:40 AL 24 OPERATION __________________________________________ Switching on and off w f FANTASY GOOD BYE 1 Press »ON/OFF« to switch on the device. [. . . ] To activate alarm stand-by, press »ON ALARM OFF« until »e« or » « appear in the display. 2 28 OPERATION __________________________________________ Timer mode The device possesses a sleep timer, which switches it off in radio mode at a preset time. It is possible to set nine switch-off times between 90 and 10 minutes. Switching on the sleep timer w f 1 SLEEP 90 2 w f Press »SLEEP« to switch on the device. To set the switch-off time (90, 80, 70, 60, 50, 40, 30, 20, 10), press »SLEEP« as many times as necessary. «, briefly, for example » SLEEP 30« , then the station ­ Display: » name or frequency. [. . . ]