User manual GRUNDIG MT 6741

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GRUNDIG MT 6741. We hope that this GRUNDIG MT 6741 user guide will be useful to you.


GRUNDIG MT 6741 : Download the complete user guide (610 Ko)

You may also download the following manuals related to this product:

   GRUNDIG MT 6741 (2063 ko)
   GRUNDIG MT 6741 (677 ko)
   GRUNDIG MT 6741 (612 ko)
   GRUNDIG MT 6741 (612 ko)
   GRUNDIG MT 6741 (660 ko)
   GRUNDIG MT 6741 (676 ko)
   GRUNDIG MT 6741 (629 ko)
   GRUNDIG MT 6741 (1911 ko)

Manual abstract: user guide GRUNDIG MT 6741

Detailed instructions for use are in the User's Guide.

[. . . ] The appliance may not be used by the following people, including children: those with limited physical, sensory or mental capabilities and also those with a lack of experience and knowledge. This does not apply to the latter if they were instructed in the use of the appliance or if they use it under the supervision of a person responsible for safety. Children should always be supervised to ensure that they do not play with the appliance. No warranty claims are accepted for damage resulting from improper handling. 7 7 7 7 7 7 Do not immerse the appliance in water or let it come into contact with water, even during cleaning. [. . . ] It is not advisable to charge the batteries after every use, especially if you do not use the appliance for the full 30 minutes. Charge the batteries at your convenience only when they are completely discharged. ENGLISH 21 7 7 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 22 POWER SUPPLY __________________________ Using the charging unit 1 Plug the socket E of the appliance into the charging unit. 3 Plug the power supply unit into the wall socket. Mains operation (with the power supply unit) Check that the voltage indicated on the type plate of the power supply unit corresponds to your local power supply. The only way to disconnect the appliance from the power supply is to unplug the power supply unit. Caution 7 When in the bathroom or next to a water connection, you must only use the appliance in battery mode; never run it from the mains. 22 ENGLISH 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 23 OPERATION ______________________________ Cutting hair . . . . . . using the ceramic/stainless steel cutting head A (width 38 mm). 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 3 Place a towel around the neck and shoulders of the person whose hair you are trimming. 4 Make sure the person is seated so that their head is roughly at your eye level. Before trimming, comb the hair so that it falls naturally and you can see the direction in which it grows. 7 Press the C button to switch off the appliance after use. 2 Insert ceramic/stainless steel cutting head A carefully at the top and press down until it clicks into place. ENGLISH 23 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 24 OPERATION ______________________________ Beard trimming . . . . . . using the beard trimming attachment 9 (width 30 mm). Trimming hair or beards to a certain length . . . . . . Comb #1 Comb #2 Comb #3 Comb #4 Comb #5 Comb #6 Comb #7* 2 mm 4 mm 8 mm 12 mm 16 mm 20 mm 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 2 Insert beard trimming attachment 9 carefully at the top and press down until it clicks into place. 3 Loosen the beard hair by combing the beard in the direction the hair grows. 6 Press the C button to switch off the appliance after use. * is designed for thinning out hair. 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 2 Insert attachment A (width 38 mm) or 8 (width 30 mm) carefully at the top and press down until it clicks into place. 24 ENGLISH 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 25 OPERATION ______________________________ Note 7 The comb attachments fit both cutting heads. 3 Push the comb attachment carefully and firmly onto the rounded rear half of the cutting head from above and let it click into place. 7 After use, remove the comb attachment 1 to 6 by pressing the locking tab at the back and removing the comb attachment. Thinning out hair . . . . . . 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. [. . . ] 3 Make sure the appliance is kept out of reach of children. Environmental note This product has been made from high-quality parts and materials which can be re-used and recycled. Therefore, do not dispose of the product along with normal household waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. This is indicated by this symbol on the product, in the operating manual and on the packaging. Please find out about collection points operated by your local authority. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GRUNDIG MT 6741




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GRUNDIG MT 6741 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.